How to Perform the Door Handing Process:
THE LEADER IN RESIDENTIAL SECURITY
213826 10/17
2
Make sure the door is open. Insert the battery pack while pressing and
holding the Program button. Release the button when the battery pack is
all the way inside the lock interior.
Install 4 AA batteries in battery pack.
1
5
3
The Status LED will flash red and green, and the lock will beep.
Did the latch bolt bolt retract and extend on its own?
Status LED
4
Press and release the Program button again. The latch bolt will retract and
extend on its own.
YES
NO
or
Door handing process
was successful! Proceed
to next step after latch
bolt stops moving.
Remove battery pack,
wait 15 seconds,
then attempt the
process again.
