background image

¨

USERÕS MANUAL

Model No. WESY99490
Serial No. 

The serial number is found in the
location shown below. Write the
serial number in the space above.

CAUTION

Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manu-
al for future reference.

Serial

Number

Decal

Patent Pending

QUESTIONS?

As a manufacturer, we are 
committed to providing com-
plete customer satisfaction. If
you have questions, or if there
are missing parts, we will guar-
antee complete satisfaction
through direct assistance from
our factory.

TO AVOID UNNECESSARY
DELAYS, PLEASE CALL
DIRECT TO OUR TOLL-FREE
CUSTOMER HOT LINE. The
trained technicians on our cus-
tomer hot line will provide
immediate assistance, free of
charge to you.  

CUSTOMER HOT LINE:  

1-800-999-3756

Mon.ÐFri., 6 a.m.Ð6 p.m. MST

Visit our website at

www.weiderfitness.com

new products, prizes,

fitness tips, and much more!

THIS MANUAL RECEIVED

SEVERAL DRAWING

CHANGES AFTER IT PRINT-

ED FOR CUSTOMER USE.
THE DRAWING CHANGES

WERE MADE AND THE REV.

DATE WAS CHANGED TO

R0999B, BUT THE MANUAL

HAS NOT PRINTED AGAIN.

Summary of Contents for Pro 9935


































Reviews: