background image

QUESTIONS?

As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts,
please call:

08457 089 009

Or write:
ICON Health & Fitness, Ltd.
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds
LS11 8JG
UK

[email protected]

Model No. WEFMBE14010
Serial No. 

Write the serial number in the
space above for future reference.

CAUTION

Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.

USER’S MANUAL

Part No. 192831 R0605A

Printed in China © 2004 ICON IP, Inc.

Serial Number Decal

www.iconeurope.com

Visit our website at

ORDERING REPLACEMENT PARTS

If you encounter any problems with this product, or if you need to order replacement parts, contact the ICON
Health & Fitness, Ltd. office, or write: 

ICON Health & Fitness, Ltd.
Customer Service Department
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds
LS11 8JG
UK

Tel:

Outside the UK: 0 (044) 113 387 7133
Fax: 0 (044) 113 387 7125

When ordering parts, please be prepared to give the following information:

•  the MODEL NUMBER of the product (WEFMBE14010)

•  the NAME of the product (WEIDER

®

BODY WORKS PRO)

•  the SERIAL NUMBER of the product (see the front cover of this manual)

•  the KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST and the EXPLODED DRAWING on

pages 10 and 11)

08457 089 009

Summary of Contents for BODY WORKS PRO WEFMBE14010







Reviews: