OWNER’S MANUAL
WB-UPS-1100-8 WB-UPS-1500-8 WB-UPS-2000-8
™
WELCOME TO WATTBOX™
WattBox power products are designed specifically to provide customers with advanced protection for their valuable electronics and custom
integrators with maximum flexibility for installation. Rest assured that WattBox products deliver the protection and safety for your customers’ needs.
All WattBox products are UL certified and built with the highest-quality components available.
KEY FEATURES
Inlet Surge Protection –
Built-in protection for the UPS and all connected equipment against power surges.
Automatic Voltage Regulation –
Incoming power is monitored to avoid harmful over- or under-voltage conditions. Power is increased in Boost
mode and decreased in Buck mode.
Battery Backup –
Battery backup for powering critical equipment during power outages and fluctuations. Batteries can be serviced without turning
the UPS off.
Programmable Outlets –
Noncritical equipment can be connected to programmable outlets that turn off early to save battery power.
Emergency Power Off –
Built-in contact for EPO.
PC Connection –
Built-in connections for PC access to the GUI and shutdown control to notify the PC when battery level is critical.
SNMP Card (sold separately) –
Use the SNMP card to access the GUI over Ethernet and notify devices on the network when the battery level is
critical.
IMPORTANT – BATTERIES ARE DISCONNECTED FOR SHIPPING
When you receive your UPS, the internal backup batteries are disconnected from the circuit board for safety during shipping. Re-connect the wires
before installing the UPS.
Step 1
Step 2
Step 3
Remove front panel.
Connect the battery wires.
Replace the front panel.
FI
VE
YE
AR LIM
IT
ED
P
RO
DU
CT
W
AR
RA
N
T
Y
SURGE
PROTECTOR
$50,000
