Insert
8
6
Water ON
8
6
QUICK START GUIDE
Review full instruction book prior to first use
1
3
4
5
2
© 2017 Water Pik, Inc.
1.800.525.2774 (USA)
Model WP-860/861/862/871/872/881/882
This device is only compatible with voltages of 120 VAC, 60Hz
English
Fill reservoir with
warm water and
replace it firmly
on the base.
Insert tip firmly until
it clicks into place.
Turn pressure to high, point
tip into sink, turn power
and water switches on until
water flows. Then turn off.
Turn power and water on.
Start on low pressure and
increase to your liking.
Close lips enough to
prevent splashing, while
still allowing water
to flow from mouth
into the sink.
Aim water at the gumline
at a 90° angle. Follow the
gumline and pause briefly
between teeth.
TO AVOID MESS: PLACE THE
TIP IN YOUR MOUTH BEFORE
TURNING UNIT ON
Register your product and
receive over $50 in savings.
waterpik.com/registration
Visit waterpik.com/vid860
FIRST USE
START WATER FLOSSING
TECHNIQUE
HOW TO VIDEO
LEAN OVER SINK
