WaterLogic WL350 Troubleshooting Download

Page: 1 / 3

WL350

Manual

Page 56 – Revision 11‐21‐2018

POWER TROUBLESHOOTING INDEX

1. Red Heater & Compressor Power Switch won't light and the Red LED on the Front

won't light

2. Red Heater & Compressor Power Switch is lit but the red LED on the Front is not lit

3. Compressor Runs but does Not Chill

4. Compressor is Not Running

Red Heater and Compressor Power Switch won’t light and the Red LED on the
Front won’t light

Possible Reason

Solution

Circuit Breaker

Check the Circuit Breaker

Fuse is Blown

Replace Fuse

Defective / Loose Power Cord

Check that Power Cord is properly plugged in. If it is properly
plugged in, use a different power cord to verify.

Failed Socket ‐ Power Line
Noise Filter, ElectroMagnetic
Interference filter (EMI)

Replace Socket ‐ Power Line Noise Filter, ElectroMagnetic
Interference filter (EMI)

Defective Red Heater &
Compressor Switch

Replace Red Heater & Compressor Switch

Summary of Contents for WL350

Page 1: ...or Power Switch won t light and the Red LED on the Front won t light Possible Reason Solution Circuit Breaker Check the Circuit Breaker Fuse is Blown Replace Fuse Defective Loose Power Cord Check that...

Page 2: ...PCB Defective Red Heater Compressor Switch Replace Red Heater Compressor Switch 3 Compressor Runs But Does Not Chill Possible Reason Solution Condenser is dirty Clean the condensing coil of any obstru...

Page 3: ...d Heater Compressor Switch on I ON Compressor Starting Circuit Turn Red Heater Compressor Switch off O OFF Remove the compressor cap on side of the compressor Disconnect the black and red terminal con...