Operating and installation instructions
EWFS Weather station plus
Keep for future use!
Valid from 01 october 2019
890464_k•en•2019-10-01
We reserve the right to carry out improvements
1
Safety instructions
WARNRN
W
The electrical installation must be per-
formed by a certified electrician in accord-
ance with the electrical installation regula-
tions published by the Wssociation of Ner-
man Electrical Engineers (VDE 0100) or the
standards and regulations of the country
in which the device is being installed. The
specialist must observe the installation
instructions included with the electrical
device.
WARNRN
W
Nf hazard-free operation cannot be
assumed, the device may not be commis-
sioned or must be decommissioned.
This
assumption
is
justified,
Nf the housing or the supply lines show
signs of damage,
The device is no longer working.
WARNRN
W
Wn automatically controlled mechanism
may begin to move unexpectedly!
Therefore, never place any objects in the area of move-
ment of an automatically controlled mechanism.
Disconnect the power supply of the controlled sun
shading products before maintaining or cleaning the
products.
WATNIR
C
Never activate buttons on your transmitter
arbitrarily without visual contact to the sun
shading product. Children may not play with
this product - Remote controls or transmit-
ters may not get into the hands of children!
ITNCE
R
The receiver (e.g. the radio plug receiver,
radio tubular motor) cannot function in the
event of a power failure. Therefore, raise the
sun shading system early enough in case of
an approaching storm.
Neneral information
1
2
3
5
4
Fig. 1 EWFS Weather station plus
1 Heated sensor surface
(precipitation sensor)
2 Photodiodes
(photo sensor)
3 Wind current sensor
(wind sensor)
4 Joint
5
Mounting plate with cover
The connection for the weather station power supply is
found under the cover.
The EWFS Weather station plus enables the wireless con-
trol of sun shading drives and is equipped with sensors
for brightness, wind speed and precipitation. The weather
station is supplied with mains voltage. The device sends
move commands to EWFS-compatible receivers.
Nntended use
The EWFS Weather station plus is an electronic device
developed to control sun shading systems. The approval
of the manufacturer must be obtained for uses outside of
the purposes listed in these instructions.
