Assembly Instructions
Mobile Breath Guard with Mounting Posts
©
2020 The Vollrath Company L.L.C.
Part No. 352598-1
4/29/20
ASSEMBLY (2 PERSON)
Tools You Will Need
• Drill and drill bits
• Fasteners for mounting to countertop (Recommendation #10
stainless steel, round or hex head. Screw length and thread type will
vary depending on specific application)
Before starting installation, verify that the mounting surface and
substrate are capable of structurally supporting the breath guard and
mounting screws.
1. Slightly tighten the thumbscrews to steady the mounting brackets
while the breath guard is being installed.
2. Peel the protective backing from the shield and install the breath
guard to the uprights using the supplied washers and thumbscrews.
3. Position the shield in the vertical position for easier mounting.
4. Align the mounting posts on the mounting surface. Make sure the
posts are plumb using a level and mark the holes for pre-drilling.
5. Pre-drill holes for the appropriate fastener size.
6. Fasten the mounting posts to the mounting surface.
Item No.
Description
MB24MOUNT
Mobile Breath Guard, 24" (61 cm)
MB36MOUNT
Mobile Breath Guard, 36" (91 cm)
MB48MOUNT
Mobile Breath Guard, 48" (122 cm)
MB60MOUNT
Mobile Breath Guard, 60" (152 cm)
