Operator’s Manual
Heavy-Duty Electric Slicers
©
2017 The Vollrath Company L.L.C.
Part No. 350009-1 ml
6/16/17
Register your product at Vollrath.com/registration and become eligible to win a free 10" Vollrath Tribute® fry pan
Thank you for purchasing this Vollrath equipment. Before operating the
equipment, read and familiarize yourself with the following operating
and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE. Save the original box and packaging. Use this packaging
to ship the equipment if repairs are needed.
SAFETY PRECAUTIONS
To ensure safe operation, read the following statements and understand
their meaning. This manual contains safety precautions which are
explained below. Please read carefully.
Warning is used to indicate the presence of a hazard that will or can
cause severe personal injury or death.
Caution is used to indicate the presence of a hazard that will or can
cause minor or major personal injury if the caution is ignored.
NOTICE: Notice is used to note information that is important but not
hazard-related.
To reduce risk of injury or damage to the equipment:
• Keep out of reach of children.
• Do not turn equipment on unless all guards are in place.
• Keep the carriage slide and gauge plate slide lubricated to ensure
easy movement.
• Do not load food by hand: always use food pusher.
• Equipment must be connected to a properly-grounded electrical
supply matching the nameplate rating.
• Always unplug equipment before cleaning.
• Keep equipment away from water; avoid water jets during cleaning.
• Equipment should only be used in a flat, level position.
• Do not operate unattended.
• Do not operate this appliance if it has a damaged cord or a plug, if it
is not working properly or if it has been damaged or dropped.
• Do not immerse the cord or plug in water. Keep the cord away from
heated surfaces. Do not hang the cord over the edge of a table or
counter.
• Do not use an extension cord with this equipment. Do not plug this
equipment into a power strip or multi-outlet power cord.
• This equipment must be installed by a qualified person and in
accordance with local codes and ordinances.
• Do not spray controls or outside of equipment with liquids or
cleaning agents.
• Do not clean the equipment with steel wool.
• Keep equipment and power cord away from open flames, electric
burners or excessive heat.
Item No. Model No. Description
Drive Peak HP Voltage Amps Hz
Plug
40952
SLM300/S
12
"
Blade
Belt
1/2
120
2.0
60
NEMA
5-15P
WARNING
CAUTION
WARNING
Severe injury can occur if this equipment is not used properly.
