background image

ENGLISH

Operator’s Manual

Item No. 26131-1

Rev 2/23/15

Vacuum Packing machine with 12" Sealing Bar

Thank you for purchasing this Vollrath Vacuum Packing Machine. Before operating the equipment, read and familiarize yourself with 

the following operating and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Save the original box and 

packaging. Use this packaging to ship the equipment if repairs are needed

.

Item

Model Description

Voltage

Hz

Amps

Plug 

40831 VP12 Vacuum Packing Machine 

with 12" Sealing Bar

120

60

8.5

NEMA 

5-15P

S

afety

 P

recautionS

To ensure safe operation, read the following statements and understand 

their meaning. This manual contains safety precautions which are 

explained below. Please read carefully.

  

warning

Warning is used to indicate the presence of a hazard that will or can cause 

severe personal injury or death. 

  

cautiOn

Caution is used to indicate the presence of a hazard that will or can cause 

minor or major personal injury if the caution is ignored.

NOTICE

 is used to note information that is important but not hazard-

related.
These precautions should be followed at all times. Failure to follow these 

precautions could result in injury to yourself and others.

 

„

Unplug when not in use.

 

„

Keep unit and power cord away from open flames, electric burners or 

excessive heat.

 

„

Do not operate unattended. 

 

„

Do not operate if unit has been damaged or is malfunctioning in any 

way. 

f

unction

 

and

 P

urPoSe

This unit is intended to vacuum seal food products in a commercial kitchen 

environment. It is not intended for household, industrial or laboratory use. 

Summary of Contents for 40831 VP12







Reviews: