K-1900-812L-IP or
K-1900812LIPEWP
VoIP Entry Phone System
with Handset & Keypad
January 3, 2020
QUICK START GUIDE
VIKING
Electronics, Inc.
K
See Product Manual for complete installation and programming instructions.
1.0 Out-of-Box
1.1 Verify that you have received all of the parts listed
1.2 Download the product manual
1. Go to
www.vikingelectronics.com
and
enter
K-1900-812L-IP
in the search box
2. Click
K-1900-812L-IP
in the search results
3. Click
Product Manual
to open and
download the PDF
1.3 Download and install the programming software
1. Go to
www.vikingelectronics.com
and enter
K-1900-812L-IP
in the search box
2. Click
K-1900-812L-IP
in the search results
3. Scroll down the page to Downloads, click
IP Programming Software
4. Install the programming software by saving or opening the file and then clicking on
setup Viking IP Programming.exe
5. Follow the prompts on your screen to complete software installation
2.0 Power Source
Select
PoE Switch
or
PoE Injector
that meets the following requirements:
1. IEEE 802.3af / 802.3at / 802.3bt compliant
2. Capable of providing at least 4 Watts (class 1)
Note:
CAT5e (or higher) cable recommended
X 1
K-1900-812L-IP or
K-1900812LIPEWP
VoIP Entry Phone with
Handset, 12” Cable with
Lanyard and Keypad
X 1
Torx T-10 Security Bit
X 14
Gel-Filled Butt Connectors
X 1
Cable Assembly
X 8
6-32 x 3/4” Flat Head Torx
Drive Screws
X 1
Rough In Box
X 1
Wire Nut
X 4
Kepnut #6
Scan the QR code to
open and download
the product manual
- OR -
