●
Touch panel
single
color, dual color, RGB or RGBW
PWM
constant
voltage
controller.
●
Ultra sensitive high strength glass touch panel with touch color slide in the middle and backlighting.
●
Smooth and accurate color adjustment by touching the color slide.
●
Adopt
2
.
4GHz
wireless
technology
,
remote distance up to 30m.
●
Touch keys with chord tones and LED indicator.
Wall Mounted Touch Panel
Single Color / Dual Color / RGB / RGBW LED
Constant Voltage Controller
Wiring diagram for PWM output
Feature
User Guide
Technical parameter
Model
Input voltage
Output current
Output power
Size(mm)
T1-1
T2-1
86x86x35
T3-1
12-24VDC
12
-24VDC
12
-24VDC
4CH,3A/CH
144-288W
144-288W
144-288W
4CH,3A/CH
3CH,4A/CH
86x86x35
86x86x35
Output signal
PWM
PWM
PWM
Light type
Single color
Dual color
RGB
T4-1
12
-24VDC
144-288W
4CH,3A/CH
86x86x35
PWM
RGBW
●
T1-1 Single color panel
Key function
T3-1
T1-1
T2-1
Adjust dynamic mode speed,10 levels.
Short press play 10 built-in mode,
long press run mode-cycle.
Turn on
/
off light
4
Scenes,
short press recall scene.
Long press to save the
current color into 1/2/3/4.
Color slide
A
djust brigh
tness
,
10
levels
.
Play dynamic mode,6 level speed.
Turn on
/
off light.
Turn on
/
off light.
Play dynamic mode,6 level speed.
Brightness,10 levels.
Turn off light after 20s.
Color / Brightness slide
Brightness slide
Power
20
S
Delay Off
Mode
Bright
CCT
DIM
Power
Mode
Mode
Speed
Bright
Scene
Scene
Scene
Scene
Power
Brightness,10 levels.
Color temperature,10 levels.
Adjust dynamic mode speed
or static color brightness,10 levels.
Short press play 10 built-in mode,
long press run mode-cycle.
Turn on
/
off light.
Mode
Scene
Scene
Scene
Scene
W
White
Power
Brt/Speed
4
Scenes,
short press recall scene.
Long press to save the
current color into 1/2/3/4.
Color slide
Short press turn on/off W channel,
long press adjust W channel brightness.
T4-1
●
Single color panel
●
Dual color panel
●
RGB panel
●
RGBW panel
Note:
After touch power key to turn off light, long press power key for 5 seconds will turn on or turn off tone.
Wall mounted single color/dual color/RGB/RGBW LED controller T1-1/T2-1/T3-1/T4-1 is a full touch controller
with 4 channel constant voltage output, and offers fast and accurate color adjustment with unique design touch
color slide.
Match guide
Panel controller can match with RF remote by using power-up optionally.
1. Match
:
Switch off the power, then switch on power again,
short press on/off key or zone key 3 times on the RF remote quickly within 5s after power on,
the link is done once the light blinks 3 times.
2. Delete
:
Switch off the power, then switch on power again,
short press on/off key or zone key 5 times on the RF remote quickly within 5s after power on,
the unlink is done once the light blinks 5 times.
3. Multiple zone remote only use zone key to match each zone receiver.
P
o
w
e
r S
u
p
p
ly
1
2
-2
4
V
D
C
C
o
n
s
ta
n
t Vo
lt
a
g
e
AC110-230V
+
+
+
+
Single color LED strip x 4
T1
-
1
