Rev. 7/14/2016
PMPS, MANUAL
Copyright 2016 Vestil Manufacturing Corp.
Page 1 of 22
PM/PS-Series Pallet Handlers
Instruction Manual
Receiving instructions:
After delivery, IMMEDIATELY remove the packaging from the product in a manner that preserves the packaging and
maintains the orientation of the product in the packaging; then inspect the product closely to determine whether it
sustained damage during transport.
If damage is discovered during the inspection, immediately record a
complete description of the damage on the bill of lading
. If the product is undamaged, discard the packaging.
Notes:
1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where the product
is
used
is exclusively the responsibility of the owner/end-user.
2) VESTIL is
not liable
for any injury or property damage that occurs as a consequence of failing to apply either:
a) Instructions in this manual; or b) information provided on product labels.
Vestil Manufacturing Corp.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Fax: (260) 665-1339
www.vestilmfg.com
e-mail:
Table of Contents:
Signal Words……………………………………………..……………………………………………………………..………….. 2
Safe Use Recommendations……………..……………………………………………..…………………………..…….……… 2
Product Specifications…………………………………..…………………………………………………………..…….………. 3
FIG. 1A: PMPS-50M exploded parts diagram & bill of materials………...…………………………………………………… 4
FIG. 1B: PMPS-50 exploded parts diagram & bill of materials……………………………………………………………….. 5
FIG. 2: PMPS-60 exploded parts diagram & bill of materials………...………………………………………………………..6
FIGS. 3 - 8: AC and DC modular power unit wiring diagrams, exploded parts diagrams, and layouts………………
7 - 12
Loading instructions……………………………………………………………………………………………………………. ... 12
FIGS. 9A-9B: Autoshifter Foot Pump Exploded Parts Diagram…………………………………………………………….. 13
Autoshifter Bill of Materials………………………………………………………………………………………………………. 14
FIG. 10: Hydraulic Circuit Diagram (Manual Foot Pump)…………….……………………………………………….…… ... 14
Operation Instructions (Manual Units): Pump purging procedure; Cylinder purging procedure…………………………. 15
Troubleshooting: Manual Foot Pump…………………………………………………………………………………………… 16
FIG. 11: Hydraulic Circuit Diagram (electrically powered units)……………………………………………………………... 17
Operation Instructions (Electric Units): Lowering solenoid; Velocity fuse; Air bleeding procedure……………………… 18
Battery Charger Operation………………………………………………………………………………………………………. 18
Inspections & Maintenance……………………………………………………………………………………………………… 19
Troubleshooting Guide…………………………………………………………………………………………………………… 20
Labeling Diagram…………….....………………………………………………………………………………………………… 21
Limited Warranty…...…………………………………………………………………………………………………………..…. 22
