1
Tote, Large
05P22.15
Tote, Small
05P22.17
Tall Knob
05P22.04
for Low-Angle Block Plane
Our tote and tall knob convert your Veritas
®
Low-Angle Block Plane into a small
bevel-up smoothing plane. To install the tote, skewing of the blade is required to
gain access to the mounting screws. The tote then slips into place and is prevented
from shifting due to small projections engaging in mating holes at the rear of the
plane body.
Tote Installation
Loosen the lever cap wheel and move the adjustment mechanism completely to one
side. This moves the heel of the blade to the opposite side, fully exposing one of the
threaded holes used for mounting the tote (as shown in
Figure 2
).
Tall Knob
Mounting
Screws
Tote
Figure 1: Tote and tall knob assembly.
Mounting
Screw
Adjustment
Mechanism
Blade
Lever Cap
Wheel
Hole
Threaded
Hole
Figure 2: Heel of blade moved to expose threaded hole for mounting tote.
