PCM6
- 1 -
VELLEMAN
PCM6 – WIRELESS & RECHARGEABLE MINI OPTICAL COMPUTER MOUSE
1. Introd Contents
Thank you for buying the
PCM6
! Please read the manual thoroughly before using the mouse. Make sure that the device
was not damaged in transit. Contact your dealer if the device is damaged.
The packaging contains 1 USB receiver, 1 wireless optical mouse, 1 charging cable and 2 rechargeable AAA-batteries.
2. Installing the Hardware
Turn off the computer. Plug the USB receiver into your computer's USB port.
3. Installing the Batteries
Open the battery compartment at the back of the mouse. Insert 2 AAA-batteries according to the polarity indications.
4. Charging the Mouse
Turn on the computer. Use the charging cable to link the mouse with the computer's USB connector. The red LED on the
mouse is lit continuously during the charging process. The charging process takes less than 6 hours and the LED turns off
when charging is finished.
The LED blinks when the batteries are running low.
5. Linkage
Press the "connect" button on the underside of the mouse and then press the "connect" button on the USB receiver. The
mouse is ready for use.
6. Troubleshooting
1. Check the installation of the batteries or replace them if they are running low.
2. Charge the mouse
3. Check the connection of the USB receiver
4. Press the connect button on the USB receiver followed by the connect button on the mouse
7. Warning
1. Do not try to charge the mouse with non-rechargeable batteries.
2. Do not use the mouse on a metal surface, a reflecting surface, glass or a mirror 3D mouse pad.
3. The mouse may malfunction in an environment with radio frequency interference. Remove the interference to restore
normal operation.
4. If the mouse is used in an environment with electrostatic discharge, the user may have to reset it.
