4001533-04
V
ENTANA
WARNING
This conversion kit shall be installed by a
qualifi ed service agency in accordance with
the manufacturer’s instructions and all appli-
cable codes and requirements of the authority
having jurisdiction. If the information in these
instructions is not followed exactly, a fi re, ex-
plosion or production of carbon monoxide may
result causing property damage, personal in-
jury or loss of life. The qualifi ed service agency
is responsible for the proper installation of this
kit. The installation is not proper and complete
until the operation of the converted appliance
is checked as specifi ed in the manufacturer’s
instructions supplied with the kit.
Use this manual in conjunction with the instal-
lation manual supplied with the appliance.
Gas Conversion Kit
1200PCK/NCK
Installation Instructions
This appliance is certifi ed for use from 0–4500 feet. For
altitudes above 4500 feet, see local codes.
Kit Contents
1 Main burner
1 Pilot injector—see chart for identifi cation
1 Main burner elbow injector—see chart for
identifi cation
1 Minimum rate by-pass screw—see chart for
identifi cation
1 Set of conversion labels
1 Ceramic middle log (NG 4001370; LPG 4001534)
Tools Required
•
Wrenches, to disconnect gas line
•
Phillips (+) screwdriver, to remove burner module
•
Small (jewelers size) fl at blade screwdriver, to set
pressure
•
Small fl at blade screwdriver, to release pressure tap
on valve
•
Nut driver 8 mm or 5/16”, to remove burner nuts
•
Needle nose pliers, to remove by-pass screw
•
Hex (Allen) wrench, 4 mm or 5/32”, to remove pilot
injector
•
Manometer, to set pressure when regulator is integral
with valve
Use with with
Valor Models 1200 Heater ONLY
Model
1200NG
1200LPG
Gas
Natural
Propane
Altitude (Ft.)*
0-4,500 feet*
Input Maximum (Btu/h)
36,000
31,000
Input Minimum (Btu/h)
15,000
15,000
Manifold Pressure (in w.c.)
3.6
10.5
Minimum Supply Pressure (in w.c.)
5.0
11.0
Maximum Supply Pressure (in w.c.)
11.0
14.0
Main Burner Injector Marking
82-1200
92-360
Pilot Injector Marking
62
30
Min. Rate By-Pass Screw
190
125
Specifi cations
© Copyright Miles Industries Ltd., 2014.
