background image

1

4003648-06

MFCS01 or MFCS02

Madrona Traditional Stove Casting - 

Arched front

MF28—Madrona Engine

(sold separately)

MF28—Madrona Engine 

(sold separately)

MFCS01 or MFCS02

Madrona Traditional Stove Casting - 

Square front

Note: This kit must be 

installed or serviced by a 

qualified installer, service 

agency or gas supplier. 

These instructions are to be 

used in conjunction with the 

main installation instructions 

for the above listed heater 

model.

Madrona Traditional Stove Casing

MFCS01 

(black)

 or MFCS02 

(Majolica brown)

Approved for use with 

Valor heater models MF28 ONLY

HOT GLASS

 WILL 

CAUSE BURNS.

DO NOT TOUCH 

GLASS 

UNTIL COOLED.

NEVER 

ALLOW CHILDREN 

TO TOUCH GLASS.

DANGER

!

A barrier designed to reduce the risk of burns from the hot 
viewing glass is provided with this appliance and must be 
installed for the protection of children and other at-risk 
individuals.

INSTALLER: Leave this 

manual with the appliance.
CONSUMER: Retain this 

manual for future reference.

INSTALLATION MANUAL

Madrona

© Copyright Miles Industries Ltd., 2020

To complete the installation of this kit you need:

•  MF28 Madrona one of the following Casing:

•  Black Arched model: 

MFCS0

1-1

 + MFCS0

1-2

•  Black Square model: 

MFCS0

1-1

 + MFCS0

1-3

•  Majolica Arched model: 

MFCS0

2-1

 + MFCS0

2-2

•  Majolica Square model: 

MFCS0

2-1

 + MFCS0

2-3

Overview

Summary of Contents for MADRONA MFCS01

















Reviews: