![background image](http://html2.mh-extra.com/html/valley-dynamo/firestorm/firestorm_unpacking-and-setup_3244770001.webp)
Unpacking and Setup
CAUTION: This is a very heavy product and should be assembled by a minimum of two
people.
NOTE: These instructions should be followed completely to unpack your new Air Hockey
table correctly.
NOTE: For reasons of safety, Valley-Dynamo, strongly recommends that a minimum of two
people be involved in the setup on your Air Hockey
table.
NOTE: To ease installation, setup should be performed near the final location
1.
Lay the carton flat on the floor, with the Label “This Side Up” facing upwards.
2. Cut the banding and remove the Carton Top.
3. Cut the vertical corners of the Carton Bottom and lay the flaps flat to the floor.
4. PLEASE NOTE THAT THE SIDE SHIELD KIT IS LOCATED IN ONE OF THE SIDE FILLERS
5. Locate the keys, which are placed on top of the Styrofoam pad.
6. Open the Service door and remove the Parts kit and its contents.
7. Using two or more people, carefully lift the table onto it side, with the
Coin/Service Door
facing up
. Lift by the corners, avoiding the possibility of the table falling on anyone, should
they loose their grip.
NOTE: The legs are shipped inside the table.
Using a #106 key, open the trap door on the bottom of the table.