Issue 1
1
947557
CAUTION: To reduce the risk of electric shock,
Do not remove cover (or back).
No user serviceable parts inside.
Refer servicing to qualified service personnel.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within this unit.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying
this unit.
Issue 2
VE4171-D440
IP DIGITAL 4 DIGIT CLOCK/WALL MOUNT SPEAKER
INTRODUCTION
The VE4171-D440 IP Clock with Speaker includes
a 4” Digital Clock and a Wall Mount Speaker. The
wall speaker is an
8” interior talkback speaker. This
provides synchronized time, talkback intercom and
loudspeaker paging from one IP network
connection. The 4-digit Digital Clock can be
programmed to sync with any NTP (Network Time
Protocol) server. The clock and speaker
enclosures are made of steel with a durable powder
coated finish. The color of the enclosures can be
easily changed to match any décor. A cloth
covered detachable grille is included with the
speaker. Power is provided to both the clock and
speaker via a Power over Ethernet (PoE) switch
meeting the 802.3af specification.
SPECIFICATIONS
Features
RJ-45 network connection
Easy to read, high visibility Red digits display
hours and minutes (4 digit display)
Selectable 12 or 24 hour format
Power over Ethernet (PoE) 802.3af compatible
High Efficiency
DIMENSIONS/WEIGHT
– 4 Digit
VIP-D440A - 17.00
” L x 3.00” W x 6.75” H
(43.18 cm) X (7.62 cm) X (17.14 cm)
Weight: 4.50 LBS (2.0 kg)
V-1071 -
10.13” H x 12.31” W x 4.63” D
(25.73cm x 31.27cm W x 11.75cm D)
Weight: 4.25 LBS (1.9 kg)
Nominal Power Requirements
Via 802.3af PoE Ethernet Switch:
Class 3
Environment
Temperature:
0 to +40° C
Humidity:
0 to 85% non-precipitating
Precautionary Designations
INSTALLATION
FCC Information
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment. This equipment generates, uses
and can radiate radio frequency energy and if
not installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area
may cause harmful interference in which case
the user will be required to correct the
interference at
one’s own expense.
