background image

PAGE 1

by valco baby

LIO

Stroller

© Copyright VB 2014

vs111214

PRODUCT REFERENCE GUIDE

Thank you for purchasing a quality VEE BEE product. 

Please read and follow the instructions outlined in this 

guide carefully. Familiarise yourself with the construction 

and safety features; be sure that you understand all the 

warnings and safety guidelines before use. 

Important: Please read the following instructions 

carefully before assembling this product. Retain this 

guide in a safe place for future reference.

 

Due to our policy of continuous product development, 

this product is constantly evolving. It is possible that 

some features or procedures outlined here have changed 

since this document was written. If you are unsure of 

any procedure shown here, please contact us via the 

web at 

[email protected]

 to obtain the most up to date 

information before use. Include the batch number, which 

can be found on a sticker on the frame.
All pictures and diagrams herein are provided for 

illustration purposes only.  Actual product, colour or fabric 

may vary. VALCO BABY reserves the right to modify or alter 

any specification or colour without notice or obligation to 

modify any product previously purchased

FURTHER INFORMATION 

In Australia/New Zealand  

www.veebee.com.au

DISCLAIMER

1>PARTS LIST

1 x Hood with Sun Cap

2x front 

Wheels

Stroller frame 

& seat

LIO IM_020818.indd   1

2/8/18   3:22 pm

Summary of Contents for VEE BEE LIO









Reviews: