background image

SuperCapacitor  Vehicle Video Recorder

Please contact your local dealer if you have any question on this product.

Installation Guide

(1) This device should be installed in the area where 
      the windshield will be able to be cleaned.
(2) Formatting SD card on the device before beginning
      to use.  
(3) Set time zone and timing on OSD, or 
      auto-calibrating by GPS.
(4) NTSC or PAL setting through OSD.
(5) Electricity consumption: 500mA. If power supplied 
      by PC, please use Y Type USB Cable.

3. Adjust the view angle 

    properly.

4. Plug in the DC5V 

    power supply.

5. Plug in the cigarette 

    charger.

6. VVR Installation.

Best location

Cigar lighter

3M sticker

1. Power on / Record
Turn on device and wait for around 20 sec ready 
for recorded.

2. Power off / Stop record
After power off, wait for superconductor’s supply 
is off, when the power are all off. Take out SD card 
for backup or format.

Remote Controller

Check the mercury cell is installed in

correct direction. (Check the pole)

Check if the cell power is exhaust.

Check if the sensor is covered.

Check if it nears by Fluorescent Lamp.

How to check if the remote

controller is workable?



Emergency 

REC

Play

Menu

Navigator

Enter

Stop

VACRON Player

OSD

screen

on / off

Please go to VACRON Website to 

download vacron viewer
*Reminder- DirectX 9.0 is required.

Recording & Stop Recording

Product Diagram

Safety Precautions

Please Take and review some testing videos initially to make sure the images were recorded correctly.

Please note that manufacturer, its subsidiaries and affiliates, and its distributors are not liable for 

consequential damages arising from any malfunction of main device accessory, including memory 

device that results in the failure of an image to be recorded or to be recorded in a way that is machine 

readable.

Before using the product, please ensure that you read the safety precautions described below. Always 

ensure that the product is used correctly.

• Use only recommended power sources.

• Do not attempt to disassemble, alter or apply heat to the product.

• DO not apply multi cigarette lighter adapters-Applying such devices will cause 

  unstable power input to damage the vehicle video recorder.

• Please always make sure all power connectors are fully secured.

• Avoid dropping or subjecting the product to severe impacts.

• To avoid the risk of injury, do not touch the interior of the product if it has been

  dropped or otherwise damaged.

• Stop using the product immediately if it emits smoke, a strange smell, or otherwise  

  behaves abnormally.

• Do not use organic solvents such as alcohol, benzene, or thinner to clean the product.

• Do not let the product come into contact with water (e.g. sea water) or other liquids.

• Do not allow liquids or foreign objects to enter the VVR.

• Do not place the VVR near or in direct flame.

• Do not handle the power cord with wet hands.

• Do not use the equipment in a manner that exceeds the rated capacity of the 

  electrical outlet or wiring accessories.

• Do not use if the power cord or plug are damaged, or not fully plugged into the outlet.

• Do not allow dirt or metal objects (such as pins or keys) to contact the terminals or plug.

• Avoid using, placing or storing the product in the humid or dusty areas.

For More Information
Please check VACRON Website
http://www.vacron.com 
Made in Taiwan
Copyright@ FUHO Technology CO., LTD.

2017  MAY. V1.0 

H11A0N3700

3"

-10

~45

120º

100º

CH1 / 1080P

Google Map

CH2

OPTIONAL

External Camera (optional)

Installation diagram
To stall External Camera with 4P Phone Jack Connect (1 Vp-p Composite 
Video Output) in front or rear of the car.

Definition of 4P Phone Jack connect 

Negative

Signals

Positive

Note: To avoid camera damage, please power 
off the vehicle video recorder before plug the 
camera in.

1. Select suction-cups or stick-holder type bracket.

Notice

2. Find the optimal position

    of  device on the 

    windshield.

SD Card Installation

OSD Menu

Notice

Screen Spilt

Sleep mode

Time Setup

G-sensor

MIC ON/OFF

Format SD card

Restore
Version

1.Open SD card cover 

   on the device to insert 

   of remove SD card.

2.When not using SD 

   card, please close the 

   cover to avoid dust or 

   other items get into 

   device.

(1). Recommend Memory Card  class 10  

       or above (Minimum of 8GB)

(2). If SD card did not format by Player 

       before using, device will delete all 

       data inside and format it automatically (take 

       1~5mins). After it’s done will start to record. 

(3). Please do not convert Micro SD to SD card to 

       begin recording, to avoid the damage during 

       recording.

(4). Since memory cards have the writing  

       endurance situation, we recommend to 

       inspect the memory card and use pc for 

       playback regularly, to ensure that the memory 

       card can read and write.

(5). Some brand of SD card might not suit for 

       device, if it is not working please change other 

       brand SD card or Class.

(6). If SD card did not format by player, device will 

      delete all data and setup atomically. Some 

      devices will not able to recorded if SD card is 

      not format. 

(7). SD card 8G、16G、32G、64G or 128G, after 

       format by Player. The space will only show up 

       for 80MB rest of memory space will be 

      displayed by Player only.

(8). Please backup data from SD card regularly. 

       Avoid losing data.

(9). When event happened, please take SD card 

       out and lock it. To avoid overwrite. 

3.SD card Format / SD card Restore.

1. 5V cigarette Power adapter (miniUSB 3.5M) 
2. PHONE JACK 4 ports 90 deg turn to micro din with extra wire 2.5M 
3. Remote controller          

4. Product Disc    

5. Suction cup bracket 

6. Bracket holder                

7. Quick user guide

Standard

Optional

1. 8G/16G/32G/64G/128G _Class 10 SD card
2. External GPS Mouse(4P Phone Jack Connect)
3. External 720P (AHD Interface)
4. Extra wire for MIC(4P Phone Jack Connect)

External Camera (optional)

TYPE A : Built-in GPS

TYPE B : External  GPS (optional for G-mouse)

TYPE C : W/O GPS

CH2 External 
camera plug

Monitor On/Off

GPS positioning

Green light: power

Red light: recording

Red light(fast flashing)

Enforced recording

LCD 3

16:9

SD card Slot

CH1 1080P Lens

RTC battery cover

DC5V power input

Mini USB 
FOR PC

AV output/

GPS Mouse extra slot(optional)/

Extra wire for MIC(optional )

Reviews: