background image

Universal Tool a Division of Florida Pneumatic Mfg. Corp.  

851 Jupiter Park Lane, Jupiter FL 33458

Universal Air Tools Company Ltd.

 

Unit 8 Lane End Industrial Park, High Wycombe, HP14 3BY, UK

Universal Tool

IMPACTS

General Safety Information & Replacement Parts

WARNING:

 Risk of injury to persons. Read and 

understand operation instructions.  Always become familiar 
with all the instructions and warnings before operating any 
pneumatic tool.

TABLE OF CONTENTS

General Safety Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 
Air Compressor and Air Tool Safety . . . . . . . . . . . . . . . . . . . 2-3 
Tool Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Maintenance / Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Service Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7 

UT8642C 

UT8642CL (Extended Anvil) 

1" Impact Wrench

Summary of Contents for UT8642C








Reviews: