background image

852927D-0503J

• Please read this entire manual before installation and use of

this appliance. Failure to follow these instructions could result

in property damage, bodily injury, or even death.

Contact  your  local  building  or  fire  officials  about  obtaining

permits, restrictions and installation inspection requirements in

your area.

• Save these instructions.

If your heater is not properly installed, a house fire may result.

For everyone’s safety, follow all Installation and Operating

Directions. Never use makeshift compromises during the

installation of this appliance. Contact your local building

or  fire  officials  about  restrictions  and  installation  inspection

requirements in your area.

U.S. Environmental Protection Agency 

Certified to comply with 2020 

particulate emissions standards.

MODEL: VG5780

SAVE THESE INSTRUCTIONS

THIS MANUAL WILL HELP YOU TO OBTAIN EFFICIENT, DEPENDABLE SERVICE FROM THE HEATER, AND ENABLE YOU 

TO ORDER REPAIR PARTS CORRECTLY. KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.

CALIFORNIA PROPOSITION 65 WARNING:

This product can expose you to chemicals including carbon monoxide, which 

is known to the State of California to cause cancer, birth defects and/or other 

reproductive harm. For more information, go to www.P65warnings.ca.gov

Ce produit peut vous exposer à des agents chimiques, y compris au monoxyde de 

carbone, lesquels sont reconnus dans l’État de la Californie comme causant le cancer et 

des malformations congénitales ou autres dommages au fœtus. Pour obtenir plus de 

renseignements, veuillez consulter le site www.P65warnings.ca.gov

United States Stove Company

PO Box 151, 227 Industrial Park Rd.,

South Pittsburg, TN 37380

PH: (800) 750-2723

www.usstove.com

Report #: F19-550

Certified  to  ASTM  E1509-12  (2017),  and 

Certified to ULC S627, 2000, 

 

This unit is not 

intended to be used as a primary 

source of heat. 

R

Summary of Contents for VOGELZANG VG5780

























































Reviews: