MS852N
2D Imager Barcode Scanner
Quick Start Guide
Version 1.0
608709G
Connecting the Scanner
*
：
Default Option
Connect USB cable to the USB port of a host PC.
Thank you for purchasing the unitech product.
For other product documentation, please scan the QR code for more information.
Factory Default
USB Device Type
Scan Mode
Product Information
USB CDC
USB HID-KBW
Aiming On /Off
Trigger mode
Sense Mode*
Continuous Mode
Normal *
Off
Good Read LED
Good Read LED ON *
Good Read LED OFF
Enable/Disable
All Prefixes/Suffixes
Enable All Prefixes/Suffixes
Disable All Prefixes/Suffixes
Barcode Programming
Before starting scanning any setting barcode,
please do follow the instruction below.
Scanning the Enter Setup barcode can enable the engine to
enter the setup mode. Then you can scan a number of programming
barcodes to configure your engine. To exit the setup mode,
scan the Exit Setup barcode.
Enter Setup
Exit Setup *
USB HID-POS
Always On
A trigger pull activates a decode session.
The engine activates a decode session every time it detects a barcode presented to it.
The engine automatically starts one decode session after another.
