background image

VS1600XR / VS2600XR

Vehicle Security System

with Rolling Code and

Duel Immobilisers

Uniden's policy is one of continual development and improvement.  For this reason, Uniden reserves the right to change

specifications without notice.

Copyright 

© 

2002 

Uniden. 

All rights reserved.

File:\DTP\MANUAL\Uniden\MoVs2600Xr.P65\JUL2001

ORDER PART# 760-919/916

Congratulations!  And thank you for purchasing the 

VS1600XR / VS2600XR Vehicle

Security System

!

The 

VS1600XR / VS2600XR Vehicle Security System

 are one of the most reliable and

economical ways to protect your vehicle.  Once armed, your starter, and ignition systems

are cut, giving potential thieves 2 headaches!  Even if they smash your 

VS1600XR /

VS2600XR Vehicle Security System

 , they cannot start your car! In addition, opening a

door or turning the ignition switch ON triggers the 

VS1600XR / VS2600XR Vehicle

Security System

 and siren or horn will sound.  What's more?

VS1600XR / VS2600XR Vehicle Security System

 is equipped with the patented 

Rolling

Code 

technology!

REMOTE CONTROL TRANSMITTER

Rolling Code

With the 

Rolling Code 

technology, the alarm's RF code changes every time you press the

remote control button, the receiver never responds twice to the same code.  In addition,

with over 18 quintillion codes, the chances of ever repeating a code are virtually non-

existent.  So-called "code grabbers" and "scanners" are rendered obsolete — a thing of the

past.

FUNCTIONS OF TRANSMITTER

Button 1  

Arm, Disarm, AEI deactivation and Panic activation are usually controlled by

button 1.

Button 2  

Quiet Mode, Boot release and second car operation are usually controlled by

button 2.

Button 3 

Optional garage door opener (part SEA910.)

Operating Guide

®

Summary of Contents for VS1600XR

Page 1: ... your car In addition opening a door or turning the ignition switch ON triggers the VS1600XR VS2600XR Vehicle Security System and siren or horn will sound What s more VS1600XR VS2600XR Vehicle Security System is equipped with the patented Rolling Code technology REMOTE CONTROL TRANSMITTER Rolling Code With the Rolling Code technology the alarm s RF code changes every time you press the remote cont...

Page 2: ...n turn steady ON for 6 seconds or until you turn the ignition ON and the LED turns OFF What happens next depends on how your alarm is set ask your dealer q Alarm set for passive arming with security lock enable The system will enter arming mode If a door is opened the system is only temporar ily disarmed Closing the open door will again cause the system to re enter arming mode and relock the door ...

Page 3: ...sec after siren will begin chirping 3 Wait for 1 chirp then release switch 4 Turn on ignition Siren will chirp once signifying that the system has entered valet mode To exit valet repeat the above procedures Instead of hearing 1 chirp in step 4 exit valet will be indicated by 2 siren chirps PANIC MODE In times of emergency the system can be forced into trigger mode siren sounding and parklights fl...

Page 4: ...r Changing Security Code ensures higher level of security which is essential in performing emergency disarm and learning new transmitters 1 With the alarm in disarm mode turn ignition switch ON then OFF 2 Press transmitter button 2 twice The siren will long chirp 3 Turn ignition switch ON 4 Enter new first security code number via over ride switch Choose from 1 to 255 5 Turn ignition switch OFF 6 ...

Reviews: