background image

1

2

Ice tray

Fill tray 3/4 full to allow expansion of water during freezing. Place tray in freezer
chest. To release cubes, twist lid slightly.

Removable shelf

Shelves can be removed by pulling forward. The shelf can be placed at your
desirable position.

Freezer Shelf

To remove the freezer shelf!

1. Remove the screw on the left of inside freezer shelf with screw driver.
2. Push the shelf hooks to the back slightly and remove it by lifting off the slots of

bottom side.

3. Reverse procedure to install.

Defrost Drain Ve s s e l

To remove defrost drain vessel.

1. Lift the defrost drain vessel slightly, then rotate bottom out and pull it down.
2. Reverse procedure to install.

Take a moment to know all the features and convenience it was designed to provide.
Numbers match those in the illustration on page 1.

Here are the features of your new refrigerator.

FREEZER DOOR GASKET

FREEZER POCKET

FREEZER REMOVABLE SHELF

FREEZER TEMPERATURE

CONTROL KNOB

ICE TRAY

ICE BOX

REFRIGING-ROOM DOOR GASKET

EGG POCKET

REFRIGING-ROOM POCKET(SMALL)

REFRIGING-ROOM POCKET(LARGE)

LAMP COVER

REFRIGERATOR TEMPERATURE

CONTROL KNOB

REMOVABLE SHELF (LARGE)

GLASS SHELF

VEGETABLE BOX

CHILLED TRAY

F E ATURE CHART

Summary of Contents for DOM-B51







Reviews: