Universal Dimmer D1
Radio linked with power consumption measurement
As per 04/2020
Page 1/2
Specifications
The universal dimmer D1 is a radio controlled dimmer with integrated power
consumption measurement. In the current flush mount version, it is compati-
ble to standard switch boxes and fully integrates into the rest of your smart
home. It is not only suitable for new buildings, but also for existing buildings,
because retrofitting has, due to use of radio technology, no special require-
ments to the electrical installation. The system can gradually be extended by
adding new components. The universal dimmer D1 offers full functionality
when combined with other components of the ubisys smart home product
line and allows for example:
•
Freely configurable assignments between control elements and
consumers
•
Scenes and group controlling
•
Time and event controlled actions
•
Continuous metering
•
Surveillance
•
Control via smartphone and tablet using the ubisys app, or as usual via
buttons or switches
More information about the features of the ubisys smart home product line
can be found at www.ubisys.de.
Installation
The universal dimmer D1 is designed for installation in flush mounted sockets
according to DIN 49073. For installation behind a switch or power socket,
deep sockets are recommended.
Leads:
Dimensions:
For installation of the universal dimmer D1, the included clamps can be used.
During installation, the general risks of household voltage networks have to
be noted!
Zigbee Initial Commissioning (Brand New Device)
1.
Connect the unit to a power source (according to the connections).
2.
Open a Zigbee network: when using the ubisys gateway, tap
Confi-
guration
->
Basic Configuration
->
Open for new devices
in the
ubisys app (if you are using third-party gateways or apps, follow the
corresponding procedure).
3.
The Zigbee network is open and the device joins.
4.
The device appears in the component list:
Configuration
->
Basic
Configuration
->
Components
.
Funkvernetzt mit
Stromverbrauchsmessung
Leistungsschalter S2
230 V ~ / 50 Hz, 2 x 500 VA
2
1
2
1
Leistungsschalter S1
Funkvernetzt mit
Stromverbrauchsmessung
230 V ~ / 50 Hz, 3.680 VA
Funkvernetzt mit
Stromverbrauchsmessung
Jalousiesteuerung J1
230 V ~ / 50 Hz, 500 VA
2
1
2
1
Funkvernetzt mit
Stromverbrauchsmessung
Universaldimmer D1
230 V ~ / 50 Hz, 500 VA
2
1
Funkvernetzt
Bedieneinheit C4
AC 230 V ~ / 50 Hz
2
1
4
3
Funkvernetzt
Router R0
AC 230 V ~ / 50 Hz
Router R0
90 - 270 V~, 50/60 Hz
(12 - 400 V=)
2
1
2
1
4
3
2
1
4
3
2
1
2
1
2
2
Router R0
2
2
2
1
2
1
90 - 270 V~, 50/60 Hz
(12 - 400 V=)
47 mm
43 mm
43 mm
43 mm
43 mm
12 mm
143 mm
12 mm
143 mm
12 mm
143 mm
12 mm
143 mm
12 mm
47 mm
12 mm
47 mm
12 mm
47 mm
17 mm
47 mm
43 mm
12 mm
143 mm
12 mm
47 mm
43 mm
143 mm
12 mm
47 mm
43 mm
12 mm
143 mm
12 mm
47 mm
43 mm
12 mm
12 mm
143 mm
12 mm
Factory Reset
Power-Cycle Sequencing Factory Reset:
It is possible to instigate a factory
reset using a special power-cycle sequence without having access to the
device itself (only to its power supply). The only requirement is a simple on/
off sequence in a 1-second rythm:
1.
The device has to be powered up for at least 4 seconds.
2.
Power off for a second.
3.
Power on for a second.
Repeat steps 2.-3. in the aforementioned
1-second rythm
another 3 times,
and with the last sequence keep the device powered up (see illustration).
4.
The device will automatically reboot to the original factory settings.
Factory Reset via Button:
To reset the device to its factory fresh settings
(e.g. in order to join it to another network afterwards), press the button in the
larger of the two holes on the front for more than 10 seconds until the LED
starts flashing rapidly.
Only use the electrically isolated tool provided with the device to press the
button in the hole.
Configuration
Upon delivery the factory settings of universal dimmer D1 has switching input
1 assigned to the corresponding switching output. So it can initially be ope-
rated autonomously without a radio network. Input port 2 is not configured by
default.
For integration into the smart home radio network, the universal dimmer D1
has to be configured first. Direct access to the universal dimmer D1 is not
necessary for configuration. That means that network configuration can also
be done after successful electrical installation. It is best to hold the 16 digit
serial number of the universal dimmer D1 in the construction plan during
installation. This allows you to allocate the device at a later point.
When connected to power, the universal dimmer D1 automatically logs into
the Zigbee network. After that it can be configured via the electrician’s instal-
lation software (ubisys Network Manager) or the ubisys smartphone app.
More information about adding and configuring ubisys smart home compon-
ents can be found in the Smart Home app manual.
Preconfiguring the dimming mode
It is possible to preconfigure the dimming mode to leading or trailing edge
by using a slightly different power-cycle sequence. More information can
be found in the technical reference manual of the D1(-R) (chapter 6.1.1.) at
www.ubisys.de.
Technical Information
Rated voltage
230 V ~, 50 Hz
Dimming
Phase angle (L) and phase trailing edge (R,
C) 0 – 100%
Automatic selection of method through load
detection (R/L/C) or explicit demand (e.g.
for dimmable Retrofit-LEDs)
Max. switching power
500 VA
Bulb load
500 W
High voltage halogen
500 VA
Low voltage halogen, wound transfor-
mer with at least 85% rated load
500 VA
NV halogen switch transformer
500 VA
Funkvernetzt mit
Stromverbrauchsmessung
Leistungsschalter S2
230 V ~ / 50 Hz, 2 x 500 VA
2
1
2
1
Leistungsschalter S1
Funkvernetzt mit
Stromverbrauchsmessung
230 V ~ / 50 Hz, 3.680 VA
Funkvernetzt mit
Stromverbrauchsmessung
Jalousiesteuerung J1
230 V ~ / 50 Hz, 500 VA
2
1
2
1
Funkvernetzt mit
Stromverbrauchsmessung
Universaldimmer D1
230 V ~ / 50 Hz, 500 VA
2
1
Funkvernetzt
Bedieneinheit C4
AC 230 V ~ / 50 Hz
2
1
4
3
Funkvernetzt
Router R0
AC 230 V ~ / 50 Hz
Button
LED
Button
LED
Button
LED
Button
LED
Button
LED
Button
LED
Router R0
Button
LED
90 - 270 V~, 50/60 Hz
(12 - 400 V=)
