PAGE 1 OF 6
0523 IH-1130
1-800-295-5510
uline.com
BULK SOAP DISPENSERS
H-1130, H-3476
MOUNTING WITH DOUBLE-SIDED TAPE
For use on glazed tile, painted or unpainted metal walls.
1. Thoroughly clean wall surface and let dry.
2. Peel paper backing from tape. Press dispenser
firmly to wall at desired location and hold for
30 seconds to ensure tape is properly adhered.
(See Figures 1-2)
IMPORTANT: Wait 24 hours before filling with
soap to ensure tape has completely adhered
to wall.
Figure 2
Figure 1
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
PARTS
SAFETY
INSTALLATION
TOOLS NEEDED
Level
Tape Measure
1/4" Drill Bit
Drill
Phillips Drill Bit
Dispenser x 1
Dispenser Key x 1
Wall Anchor x 4
(Not Included)
Screw x 4
(Not Included)
• Install dispenser above a sink or counter. Never
install where spillage can fall on floor creating
hazardous conditions.
• Installer is responsible for proper installation.
• Dispenser should be mounted no more than
48" from the ground to be compliant with ADA
regulations.
