PAGE 1 OF 12
1220 IH-7986
BACKPACK PRESSURE
SPRAYER
1-800-295-5510
uline.com
H-7986
TOOL NEEDED
Phillips Screwdriver
ASSEMBLY
NOTE: Verify all parts are present before
beginning assembly.
1. Insert wand into shut-off valve. (See Figure 1)
2. Tighten screw cap clockwise onto shut-off valve.
(See Figure 1)
3. Attach pump lever by placing lever handle (C) onto
shaft (A). Align bolt holes and install two bolts (E) and
washers (F), then tighten. (See Figures 2-4)
NOTE: To install pump lever on opposite side
of sprayer, remove stop plate (D) and washer.
Install pump lever as shown. (See Figures 2-4)
Stop plate (D) should be mounted on inner bolt
hole with closed end pointing downward on
opposite side of pump shaft.
A
D
B
C
E
F
Figure 2
Figure 1
Screw
Cap
Wand
O-Ring
Gauge
Mount
Shut-off
Valve
A
B
Figure 3
Figure 4
Para Español, vea páginas 5-8.
Pour le français, consulter les pages 9-12.
