Page 1 of 3
TS3450102 Rev B
TS345-01/02
R
©
2001 Steelcase Inc.
Grand Rapids, MI 49501 U.S.A.
Printed in U.S.A.
1.
Insert the shafts of the casters
into their corresponding sockets
of the base. Push in firmly.
Stand the base upright and put it
aside.
2.
Finger tighten each of the 4 screws (H3)
attaching the control (C) to the seat, as
shown. Now tighten all 4 screws firmly
using a Phillips screwdriver.
The -01 high back chair is
shown on these pages.
The -02 mid back assembles
following the same manner.
H1
H2
C1
C3
H3
Backrest
Seat
Part Description Size Quantity
H1
Hex head screw
2-3/4"
8
H2
Lock washer
1/4" dia.
8
H3
Phillips head screw
1"
4
H4
Allen wrench
1
H3
C
