1.
2.
3.
Turn On/Off Power
Connect & Play
Adjust Volume
Press and hold finger
over right Control Area
to increase Volume.
Shake will flash
at each
increase.
Green
Press and hold finger
over left Control Area
to decrease Volume.
Shake will flash
at each decrease.
Green
VOLUME UP
VOLUME DOWN
Tunebug Shake Quick Set Manual
Place fingers over
Touch Sensitive Areas
indicated for 2 seconds.
Shake will flash
then go
Green
Blue
.
POWER ON
Place fingers over
Touch Sensitive Areas
indicated for 5 seconds,
Shake will flash
then turn off.
Red
POWER OFF
Connect with
Set Shake to Pair
1. From Off, place fingers over
designated controls for 4 sec.
until Shake flashes
/
.
Red
Blue
Connect to Bluetooth
1. Go to your audio device settttings
and enable the
Bluetooth
function.
2. Once your audio device identifies
the “TUNEBUG SHAKE”,
accept the connection.
3. Some devices require a security
code. Type “0000”.
Your Now Connected
& Ready To Play
www.tunebug.com
408.792.7022
Tunebug 830 Stewart Dr. #201 Sunnyvale Ca. 94085 www.tunebug.com 408.792.7022
Charging
Turn off Power before charging.
!Fully Charge Before Operating!
