Any questions or problems, please call Tumbl Trak at
800.331.4362 or email us at [email protected]
Addie Balance Beam
Parts:
A.
Suede covered beam
B.
(2) Rubber coated feet
C.
(4) Screws
D.
(4) Star washer
E.
Allen Wrench
Parts List
Thank you for investing in the Tumbl Trak Addie Beam. Train leaps, turns, handstands and much more. Open
box carefully and check to make sure all parts have arrived. After opening the boxes, please check the parts list
to make sure all pieces have arrived in good condition.
B.
C.
D.
E.
Assembly Instructions
STEP 1 –
Flip the beam upside down and locate the two outside screw holes on each end of
the beam. Place the feet on the beam, line up the screw holes with the tapered holes facing up.
*The inner set of holes are intended for leg risers.
Step 1
A.
STEP 2 —
(2A) Insert the screw through the star washer. (2B) Place the
screws in the tapered holes connecting the feet to the beam.
STEP 3 –
Use the Allen Wrench and turn screws unill the feet
are tightly secured to the beam.
Step 3
Step 2A
Step 2B
