Communicator 56K ESP-2
Copyright
Without the written consent of the manufacturer it is prohibited to reproduce or
transfer any part of this manual in any format, either electronically or mechanically,
as photocopy or recording, information or search systems other than for personal use
by the purchaser.
Liability
The manufacturer accepts no liability for any explicit or implicit guarantees, including
but not limited to the guarantees for saleability and suitability pertaining to a given
objective with respect to the software, the enclosed product manual or manuals and
written documentation and all other hardware included. The manufacturer reserves
the right to modify or improve its product without prior warning or acknowledgement
of any kind to third parties.
The manufacturer accepts no liability for any ensuing or accidental damages,
including damages resulting in any form of business or commercial forfeiture on the
strength of use of the product.
All company and product names are trademarks or registered trademarks of the
relevant owners.
Preface
The Communicator 56K ESP-2 serie comprises modems for normal, analogue
telephone lines. The modem can be installed by the user. This does not any require
specific expertise.
The following layout is used to show commands:
‘Configuration screen’ A software concept. These are usually shown on the screen.
<RETURN>
The key on the keyboard which is to be pressed.
[c:\setup]
A command that is to be entered using the keyboard.
Important information is given in the form shown below:
Note:
The diskette should not be formatted.
Warning:
This may cause a hazard!
