TRUST 215A SPEEDLINK ADSL PCI WEB MODEM
1
U K
First time use - procedure in brief
Section
1.
Read requirements for functionality
(4)
2.
De-install old drivers and products
(6)
3.
Build into the computer.
(7)
4. Install
driver
(8)
5. Check
installation
(10)
6.
Make internet connection
(12)
1 Introduction
This manual is intended for users of the ‘TRUST 215A SPEEDLINK ADSL PCI WEB
MODEM’. This ADSL PCI modem is intended for Internet via ADSL over an analogue
telephone line, also known as ‘Annex A’. Some basic knowledge is required in order
to build in this PCI card.
2 Safety
Before use, first read the following directions carefully:
-
This modem needs no special maintenance.
-
On no account should the equipment be submerged in any liquid. This will
damage the product. Do not use this equipment in the proximity of water.
-
Do not attempt to repair the product yourself.
3 Approval
-
This product complies with all essential requirements and other relevant
stipulations of the pertinent European directives. The Declaration of Conformity
(DoC) is available on
4
Requirements for functionality
Before you can make a connection with the Internet, you must have the following (if
in doubt, consult your Internet Service Provider):
•
Activated PSTN/POTS ADSL line (Annex A - ADSL via analogue
telephone line)
•
Activated ADSL account
•
User name and password, in the event use is made of PPPoA or PPPoE
connection.
•
VPI / VCI values
•
Network (internet) protocol
•
Encapsulation
•
ADSL splitter/filter (for simultaneous internet and telephone calling)
Note:
Without the above information, your ADSL modem is not able to
function, and there is no point in beginning with the installation of this
modem.
Note:
The TRUST 215A SPEEDLINK ADSL PCI WEB MODEM will only
work on an Annex A ADSL line, ADSL via analogue line.
!
