![background image](http://html.mh-extra.com/html/troy-bilt/flex-23aadaaa711/flex-23aadaaa711_fast-start-manual_1173221001.webp)
778-13409
© 2015 23AADAAA
Remove the five plastic caps shown below.
Note:
The first four caps pull off as shown.
The plastic cap in the inset rotates counter
clockwise to remove. If choosing not to install
the soap inlet tube at this time, the plastic cap
on the soap inlet port of the pressure washer
pump may remain in place.
Locate the bag containing the 5 multi-
colored spray nozzles, included with the
loose parts in the carton. Insert the tips
into the provided mounting holes on the
pressure washer main unit. Follow the
color pattern provided on the label on
the unit for the proper order in which to
install these tips.
Connect high
pressure hose to
spray gun handle
by threading the
hose onto the
spray gun.
Uncoil and connect the other end of the high
pressure hose to the pressure washer main unit by
threading the hose onto the hose port.
Rear Handle
Spray Nozzles
Pressure
Control Valve
Spray Handle
Hose Storage
Hanger
High Pressure
Hose
High Pressure
Outlet
Water Inlet
Port
Spray Handle Extension
Soap Inlet
Port
Soap Inlet Tube
1
3
2
4
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U