1
LID573
LID575
RFID
Reader
Document version: 1.0
Quick Start Guide.
LID573 package contents:
1x LID573 RFID reader
1x 9V battery
1x Detachable clip
1x USB cable mini B-A 1,8m.
LID575 package contents:
1x LID575 RFID reader
4x AA battery
1x USB cable mini B-A 1,8m.
Inserting batteries:
Open battery compartment at the backside of the reader.
Insert the battery and check for polarity.
Close battery compartment.
Scanning a transponder:
Press the scan button to start scanning a transponder. The reader will
beep at the start of the scanning procedure. The message
“SCANNING” appears on the LCD, together with date and time (when
selected)
When a transponder is read the reader will give a high beep and show
the code on the LCD.
When no transponder code is read the “NO TAG FOUND” message
appears and the firmware version is displayed
The read sequence will automatically stop after a short time (default 5 sec).
Changing reader settings without PC:
Press the button 5 times in a row shortly, dots will appear on the LCD.
Now hold the button and a progress bar will appear on the second
LCD line. When it completes “Release button to enter menu” will
appear on the LCD.
Now you have 4 seconds for every option to enable/disable it. Press
the button within 4 seconds to enable the displayed type.
At the end, the reader will turn off, and apply the new settings.
Reducing the number of enabled transponder types will increase reading speed.
SCANNING
9.2V
31/01
12:45
TROVAN UNIQUE
000041C7FA
NO TAG FOUND
L573V606t
20
BUZZER OFF
Push to enable:4
.....
.....
................
Release button
To enter menu
