Capetti Elettronica WSD12T-AV, User Manual

Page: 1 / 8

WA0239E_WSD12T-AV_User Manual_R02
CAPETTI ELETTRONICA s.r.l. - Strada Stratta 57
10090 CASTIGLIONE TORINESE - TORINO - ITALY
VAT 04837130014 - Phone 011.981.98.11 - Fax 011.981.98.210
e-mail info@capetti.it - web www.capetti.it
1/8
WSD12T-AV
User Manual
1. Description.
The WSD12T-AV is a datalogger with 3 input channels to acquire outdoor temperature, voltage (
0÷10V
) and current (
4÷20mA
), with
storage functionality of samples acquired.
2. Datalogger preset and use mode.

Wireless Mode:
no setup operation is needed. Typically the system is configured from factory so the datalogger is already
associated to the system basestation . The datalogger is in STANDBY mode for which is necessary to start it with
the TEST command (
refers to chapter 3 - Wireless Installation
).
Otherwise, in case the datalogger is in FACTORY RESET mode, that means it's ready for connecting to an existing
system, in order to associate it, make reference to the “ WineCapManager ” software manual. Is necessary to use
the " WineCapManager " software on the PC connected to the basestation that will be coupled with the
datalogger .

USB Datalogger Mode:
for this operation mode, stand-alone with data downloads through USB, the connection with the PC and the
“
WineCapManager ” running on it is necessary in order to modify the datalogger 's operation mode. The
sampling interval must be set with the datalogger in " STAND-ALONE " mode and automatically, the datalogger 's
clock is aligned with the PC's clock, in order to assure the temporal reference of the sample.
Sampling operations start may be selected disconnecting the USB cable or giving the proper command with the
magnetic key. (
see chapter 4 - USB Logger Installation
). More details on datalogger 's connection/disconnection
through the USB cable are available on the manual.

On field transition from USB to Wireless datalogger:
this transition is practicable in field, during the sampling period, using the wireless network association
command. When the association is done, the
datalogger becomes a wireless datalogger and, besides sending
new measures to the basestation , starts a download process towards the same basestation of the measures
acquired during the stand alone period.
Picture 1 - Product Image