Step 5
Gather six sets of hardware per the list below the diagram.
Slide flat washer onto screw, insert into table top as shown.
Slide Lock Washer onto screw, tighten the Hex Nut hand
tight. Repeat in six places. Tighten firmly with Hex Key and
Wrench.
Six Places
¼” x 1¼” Socket
Head Cap Screw
¼” Flat Washer
¼” Lock Washer
¼” Hex Nut
If you have difficulty understanding any of the instructions
and need assistance while fastening your components
together, please call Tropitone’s Customer Service Center at
949-951-2010.
Tropitone Furniture Co., Inc.
5 Marconi, Irvine, CA 92618
949 951 2010 phone
www.tropitone.com
Part # R9TCKD194
Revised: 091307
120” x 55” Cast KD Dining Table
Assembly Instructions
Read through all steps before fastening components
together. Carefully unpack cartons and check for any
damage.
CAUTION:
Do not try to lift or flip furniture
components with only one person. Components may
be heavy and awkward to handle, and may result in
injury to persons or damage to property if not lifted
properly.
Tools Required
3/16” Hex Key (Allen wrench)
1/4” Hex Key (Allen wrench)
7/16” Wrench
Parts List
(2) Cast Table Top Half Components
(approx. 67 lbs. each)
(2) Cast Pedestal Bases
(approx. 61 lbs. each)
(6) ¼” x 1¼” Socket Head Cap Screw
(6) ¼” Flat Washer
(6) ¼” Lock Washer
(6) ¼” Hex Nut
(8) 5/16” x 1¼” Socket Head Cap Screw
(8) 5/16” High Collar Lock Washer
Check that all items listed in the Parts List are in your
carton.
