manualshive.com logo in svg
background image

CONGRATULATIONS!

You have just purchased one of the finest

dog training products available.

Before starting to use this unit, carefully read this

Owner’s Manual.  It explains how to operate

and maintain your Companion.  A thorough

understanding of its contents will help

you use your Companion safely and effectively.

Tri-Tronics takes great pride in the design,

manufacture, service, and safety of its products.

If you have any questions after reading the manual,

please contact our Customer Service Department at

1-800-456-4343.

Thank you for choosing Tri-Tronics.

Product Specifications
Product specifications may change without notice or obligation since
Tri-Tronics is committed to a policy of continuous improvement.  

Certain Tri-Tronics products are covered by one or more of these U.S.
patent numbers: 4202293, 4335682, 4794402, 4802482, D298872,
4947795, 5054428, 5099797, 5193484, and patents pending.

Tri-Tronics products are made in the USA.  However, certain materials
may be sourced from quality suppliers in other countries.

Owner’s Registration Reply Card

Please take a moment to complete and return the Owner’s

Registration Reply Card. When you do, you’ll be “on file” at
Tri-Tronics.  This will help ensure timely, no-questions-asked

warranty work should you need it. You may also register on our
website at 

www.tritronics.com

by clicking on “Online Product

Registration.”

Fifth Edition November, 1999

Published by Tri-Tronics, Inc., Tucson, Arizona.

Copyright © 1999, Tri-Tronics, Inc.  

All rights reserved.  Printed in the USA.

Содержание Training collar




























Отзывы: