1.
1 x Contouring roller head
2.
1 x Facial roller handle
3.
1 x T-bar head
4.
1 x Velvet storage bag*
5.
1 x Activ Energy AA battery*
6.
1 x User guide*
*Not shown
Vibrating
SCULPTING
Roller
User Guide
Model: BE220407
Version 1.1
Safety Instructions
Parts List
•
This product is intended for domestic use only. It is not
intended for commercial, trade or industrial use.
•
WARNING: Keep the appliance dry.
•
Do not use while bathing or in the shower.
•
Do not place or drop into water or other liquid.
•
The battery should not be recharged.
•
Please remove the exhausted batteries from the appliance
and safely dispose.
•
If the appliance is to be stored unused for a long period, the
battery should be removed.
•
Never short-circuit the supply terminals of batteries.
•
The supplier is not responsible for the end use of this product
including any improper use or when used for purposes that
are not specified.
•
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of
the appliance by a person responsible for their safety.
•
Children should be supervised to ensure that they do not play
with the appliance.
•
Cleaning and user maintenance shall not be made by children
without supervision.
1
2
3
Getting Started
Remove any packaging material and labels before using
your LACURA Beauty® Vibrating Scultping Roller for the
first time.
Do not use the appliance if any part has been damaged.
In case of damage, contact our After Sales Support line
for advice on a replacement or return. Damage caused
by misuse is not covered under warranty.
Adding Batteries
The battery compartment is in the
main body of the Vibrating Sculpting
Roller. To install/replace the battery
follow the below steps.
1.
Remove the bottom base by
twisting counter clockwise until
it unscrews completely.
2.
Insert 1 x AA battery. Either
negative or positive end going in
first are both workable.
3.
Twist the battery cover
clockwise until it is secure.
Turning On/Off
1.
To turn on, rotate base counter
clockwise until vibration starts.
2.
To turn off, rotate base
clockwise until vibration stops.
Turn on
Turn off
