EN - DIGITAL LEVEL BOX
Thank you for purchasing this Trend product, which should give
lasting performance if used in accordance with these instructions.
TECHNICAL DATA
• Accuracy: ±0.2° for all angles.
• Resolution: 0.1°
• Working Range: 4 x 90°
• Working Temperature: 0°C~+50°C
• Working Humidity:
≤
85%RH
• Battery: AAA – LR03 Alkaline 1.5V
• Power life Continuous Working: 50 hours without backlight.
• Weight: 84g
• Auto Shutdown Time: 5 minutes
• Auto Shutdown Backlight Time: 30 seconds after no operation,
no moving.
DECLARATION OF CONFORMITY
This product conforms with EMC Directive 2014/30/EU.
DECLARATION OF CONFORMITY
This product conforms with UK Statutory Instruments 2016 No.
1091 - The Electromagnetic Compatibility Regulations 2016.
Denotes risk of personal injury, loss of life or damage to the
tool in case of no observance of the instructions.
INTENDED USE
This accessory is intended to be used to find angles.
SAFETY
Read and understand the instruction sheet carefully before using.
This is a sensitive precision tool. Do not disassemble or drop it.
Please note the sharp edges, avoid scratching. Store out of reach
of children. Do not use as a toy or as a weapon. Risk of trapping
hand/finger between rule and alloy butt.
PLEASE KEEP THESE INSTRUCTIONS IN A SAFE PLACE.
Users must be competent in using woodworking equipment before
using our products. Consider working environment before using
tools. Ensure working position is comfortable and component is
clamped securely. Please keep children and visitors away from
tools and work area. All tools have a residual risk so must therefore
be handled with caution.
DESCRIPTION OF PARTS - (Fig.1)
LCD Screen Icons
• 1. ABS Indicates that the level is working in absolute angle
mode.
• 2. 1 - Indicates that the digital level is calibrating for one
direction.
• 3. 2 - Indicates that the digital level is calibrating for another
direction.
• 4. Erro - Error warning
OPERATION
ON/OFF Button
• Push the ON/OFF button once to turn the unit on. The LCD
backlight will turn on and the LCD angle display will show in
ABS absolute mode.
• After approximately 10 seconds of no movement to the unit, the
backlight will turn off. To turn the backlight on, push the ON/OFF
button once or simply move the unit.
• After approximately 5 minutes of no movement or button push,
the unit will shut off. To restart the unit push the on/off button
in for 3 seconds.
• To turn off the unit, hold the ON/OFF button in for 3 seconds.
ZERO Button - (Fig.2)
• With the unit on, push the ZERO button to set the display to zero
and to enter the relative measurement mode.
• In relative measurement mode, the ABS symbol on the LCD
will disappear.
• Relative measurement mode allows the operator to measure the
difference between two objects. The absolute mode measures
the angle between a flat surface and the first object.
• To return to ABS absolute measurement mode, press the ON/
OFF button once.
• 1. ABS mode
• 2. ABS mode
• 3. Relative measuring mode
• 4. Relative measuring mode
• 5. ABS mode
Calibration (Fig.3)
The digital level has been precalibrated at the factory. The product
should only be recalibrated if it has been dropped.
• 1.Place the digital level on a flat and smooth surface, press
button ON/OFF and button ZERO at the same time, the
calibration mode is activated and “-1-“ will be displayed.
• 2.Press button ON/OFF again, “-1-“ will flash briefly. Do not
move until “-2-“ display.
• 3.Rotate digital level 180° in the same location and press
button ON/OFF, “-2-“ will flash briefly. Do not move until the
unit has completed the calibration and reset the display to the
current level.
Icon Function (Fig.4)
Symbol
showing how to adjust the surface to be levelled.
Battery Fitting and Replacement
• Make sure the digital level box is turned off.
• To fit or replace the battery, remove the battery compartment
cover.
• Remove the old battery. Insert a new AAA battery following the
polarity indicators (=/).
• IMPORTANT! Always remove the battery before storing the
instrument.
Battery Care
WARNING! Insert battery correctly (+/-). (1) KEEP OUT OF
REACH OF CHILDREN.
Swallowing may lead to serious injury or death in as little as 2
hours due to chemical burns and potential perforation of the
esophagus. Immediately see a doctor. Keep original packaging
until ready to use. Dispose of used batteries immediately. (2) Risk
of injury due to fire, explosion or leakage. Do not disassemble,
charge, crush or expose to fire or high temperatures or water. Do
not mix used and new batteries, different brands or types.
TROUBLESHOOTING
Problem
Possible Cause
Solution
No display or fuzzy
display or number
skip.
No battery
or incorrect
installation of
battery
Reinstall battery or
replace battery
tool technology
DLB
45º
45º
4.
Relative measuring
mode
5.
ABS mode
30º
30º
1.
ABS mode
2.
ABS mode
3.
Relative measuring
mode
e
RR
ON/OFF
ZERO
DIGITAL LEVEL BOX
t o o l t e c h n o l o g y
ON/OFF
ZERO
DIGITAL LEVEL BOX
t o o l t e c h n o l o g y
180°
ON/OFF
ZERO
DIGITAL LEVEL BOX
t o o l t e c h n o l o g y
1.
2.
3.
ON/OFF
ZERO
DIGITAL LEVEL BOX
ON/OFF
ZERO
DIGITAL LEVEL BOX
ON/OFF
ZERO
DIGITAL LEVEL BOX
ABS
t o o l t e c h n o l o g y
t o o l t e c h n o l o g y
t o o l t e c h n o l o g y
1.
2.
3.
4.
t o o l t e c h n o l o g y
DIGITAL LEVEL BOX
ON/OFF
ZERO
Fig. 1
ON/OFF
ZERO
DIGITAL LEVEL BOX
ABS
t o o l t e c h n o l o g y
Fig. 4
Fig. 2
Fig. 3
EN
Displays the angle between the calibration plane and water level.
DE
Zeigt den Winkel zwischen der Kalibrierebene und nivellierten Ebene an.
FR
Affiche l’angle entre le plan d’étalonnage et le niveau d’eau.
NL
Toont de hoek tussen het kalibratie-oppervlak en horizontaal (waterpas).
DK
Viser vinklen mellem kalibreringsplanet og libellen.
SE
Visar vinkeln mellan kalibreringsnivån och vattennivån.
NO
Viser vinkelen mellom kalibreringsplanet og vannstanden
FI
Näyttää kalibrointitason ja vesitason välisen kulman.
EN
Horizontal plane
DE
Horizontale Ebene
FR
Plan horizonta
NL
Horizontaal vlak
DK
Vandret plan
SE
Horisontal nivå
NO
Horisontalt plan
FI
Vaakataso
