Product Advantages
Features
Benefits
Battery powered
Portable, no cords or
hoses
Quick and easy use
Saves time and labor
Trigger delay
Saves battery charge
Durable construction Withstands everyday use
Strong motor
Can dispense higher
viscosity adhesives
Roofing & Weatherproofing Peace of Mind™
Description
Battery-Powered Cartridge Gun is specially designed
to be used with 1.5L units of dual-component Tremco
adhesive products such as Tremco Low Rise Foam
Insulation Adhesive, Tremco LR Adhesive and Tremco
LF Adhesive. The unique carriage design is extremely
durable and allows the user to install adhesive in an
upright position eliminating back strain. The tool is
powered by a 14.4 volt rechargeable battery. The
motor is designed to run on lower amps than conven-
tional cordless tools which extends overall battery life
and reduces charging time.
User Instructions
1. Assemble carriage handle using the provided (4)
screws and lock nuts with the wrench and allen key
(also included).
2. Open the clutch lever to allow movement of the
racks. Retract the rack by pulling the rack handle
away from the tool.
3. Prepare adhesive cartridge by removing caps
or plugs and installing static mixing nozzle.
Note:
Follow complete instructions for cartridge
preparation as described in product data sheet.
4. Insert cartridge into the carriage. Line up the
cartridge and the cartridge nozzle opening for
correct positioning.
5. Push the rack handle forward, lining up pistons
with the openings on the cartridge. Close the clutch
lever to engage clutch.
6. Slide the battery onto the handle until it is fully
engaged.
7. Adjust speed control knob to desired flow. High
speed is designated on the knob by the largest
“bubble” symbol. Slower speeds; smaller bubbles.
Note:
Most applications will require the tool to be
operated at full speed.
8. Hold trigger to begin dispensing adhesive. Note:
Trigger must be depressed 2 times before tool
operates when it has sat idle. This is a power saving
feature built into the tool.
9. When finished dispensing, or when end of cartridge
is reached, release trigger, open clutch, then retract
rack. Remove cartridge.
Packaging:
Battery-Powered Cartridge Gun includes 2 recharge-
able NiCd batteries, 1 battery charger, and 1 detach-
able carriage handle.
Description
Battery Powered
Maintenance Instructions
• Keep handles clean, dry and free of oil or grease.
• Clean with mild soap and damp cloth. Do not use
solvents or cleaning agents that can damage the
tools plastic parts.
• Follow cleaning and maintenance instructions in
battery charger manual and battery pack leaflet.
• Remove adhesive residue from rack and pistons
regularly if present. Apply light coating of light
machine oil to lubricate rack as needed.
• For internal lubrication and all other maintenance,
except external cleaning and battery pack
recharging, and for all repairs, return to service
center, distributor, or manufacturer.
• If the tool is not running at full capacity, check to be
sure that the battery pack is fully charged and that
Battery-Powered Cartridge Gun
For Application of Dual-Component
Tremco Adhesives
