Toshiba TDP-TW100U Conference Room Projector* Specifications
Model
TDP-TW100U*
Display Technology
Shape
0.55" DMD DLP™
No. of Pixels
786,432 (1024 x 768)
Projection Lens
Standard Lens
1.6x power zoom/auto focus
F/f (mm)
F = 2.23 - 2.82, f = 20.5 - 32.8mm
Light Source
275W
Brightness
2700 ANSI lumens
Native Resolution
XGA 1024 x 768
Wireles Technology
IEEE 802.11b/g
Color Reproduction
Full 16.7 Million Colors
Contrast Ratio
2000:1
Projection Screen Size (Diagonal)
30 - 300 inches
Projection Distance
3.5 ft - 36.4 ft
Throw Ratio
1.8 - 2.9:1
Compatible Scanning Frequency
Horizontal (kHZ)
15 - 120kHz
Vertical (Hz)
50 - 150Hz
Input Terminal
RGB
2 x D-sub 15-pin
Video
1x S-video; 1x RCA for Composite Video
RGB Audio
1x stereo mini-jack
Video Audio
2x RCA (L/R)
Input Signal Format
Video
NTSC, PAL, SECAM
Color Difference
HDTV/DTV (1080i/720p/576p/576i/480p/480i)
RGB
VGA, SVGA, XGA (native), SXGA (compressed), UXGA (compressed)
Output Terminal
Audio
1x stereo mini-jack (variable output)
RGB
1x D-sub 15-pin
Other Terminal
RS-232
1x mini DIN 8-pin
USB
1x type A USB 2.0 high-speed enabled port
Digital Keystone Correction
Automatic ve/- 30
°
Auto Set
Yes
Noise Level
36dB (33dB in low mode)
Internal Speaker
1-watt Monaural
External Dimensions (WxDxH)
11.8" x8.6" x 3.9"
Weight
6.8 lbs.
Power Consumption
385W
Power Source
100-240V, 50/60Hz
Replacement Lamp
TLP-LW10
Box Contents
Mouse remote control with laser pointer (size AAA batteries included), Mouse remote control
receiver, Power Cord, RGB Cable, Wireless LAN USB adapter, CD-ROM, User's Manual,
Soft Carrying Bag
The DLP™ logo and DLP™ medallion are trademarks of Texas Instruments.
*RoHS.
This projector is compatible with European Union Directive 2002/95/EC, Restriction of the use of certain Hazardous Substances in electrical and electronic equipment
(RoHS), which restricts use of lead, cadmium, mercury, hexavalent chromium, PBB, and PBDE. Toshiba requires its projector component suppliers to meet RoHS requirements and
verifies its suppliers' commitment to meeting RoHS requirements by conducting component sampling inspections during the product design approval process.
