background image

U.S.A INFORMATION

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) 

this device may not cause harmful interference, and (2) this device must accept any interference received, 

including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, 

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 

harmful  interference  when  the  equipment  is  operated  in  a  commercial  environment.  This  equipment 

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance 

with the instruction manual, may cause harmful interference to radio communications. Operation of this 

equipment in a residential area is likely to cause harmful interference in which case the user will be required 

to correct the interference at his own expense.

USER-INSTALLER CAUTION: Your authority to operate this FCC verified equipment could be voided if 

you make changes or modifications not expressly approved by the party responsible for compliance to 

Part 15 of the FCC Rules.

CANADA INFORMATION

CAN ICES-3 A/NMB-3 A

Following information is only for EU-member states:

In residential areas this product may cause radio interference, therefore this product must not 

be used in residential areas.

The use of the symbol indicates that this product may not be treated as household waste. By ensuring 

this product is disposed of correctly, you will help prevent potential negative consequences for 

the environment and human health, which could otherwise be caused by inappropriate waste 

handling of this product. For more detailed information about the take-back and recycling of this 

product, please contact your supplier where you purchased the product or consult.

CAUTIONS ON USE

  This apparatus does not operate on its own. Be sure to use it by connecting with the dedicated 

camera control unit (option). Please do not connect it to other equipment.

  Read the “CAUTIONS ON USE AND INSTALLATION” in the instruction manual of IK-HD3D and follow them.

  This camera is for indoor use only.

COMPONENTS

(1) Camera head (without lens, with protection cap) ........................................... 1

(2) Accessories 

  (a) Instruction manual ....................................................................................... 1

  (b) Tripod mount ............................................................................................... 1

  (c) Screws M2 x 8 ............................................................................................. 4

CONNECTION

IK-HD3D

IK-HR3H

DC IN 12V

C-mount lens

(option)

Flange

 face

Camera head

Camera control unit 

(option)

DC power supply (option)

Rear projection less than 11mm  (0.433")       

Dedicated camera cable 

(option)

DVI connection cable

(commercial product)

DVI monitor

(commercial product)

DVI terminal

  When connecting the camera cables, be sure to turn off the camera control unit and the other equipment 

connected.

  When connecting the camera head and the camera control unit, please use the dedicated camera cable (option).

  We suggest that a 2-million pixel C-mount lens is used. 

When using other lenses, the best camera performance of this camera may not be obtained.  

(For example, low resolution may occur, focus may be lost through the range of a zoom lens, and flare, 

ghosting or shading may occur)  

Furthermore, to avoid damaging the camera, use a lens which has a rear projection from the flange face 

of less than 11mm (0.433”).

  DC power is supplied by a camera cable model # EXC-3HD

** 

(option) through the camera control unit 

model # IK-HD3D (option).

 

*

 

**

 

shows a camera cable type name. Refer to the “Type name” of a camera cable in “OPTIONAL PARTS”.

  For connection, please refer to the section “5. CONNECTION” in the camera control unit IK-HD3D 

instruction manual.

INSTRUCTION MANUAL
CMOS COLOR CAMERA HEAD

IK-HR3H

DISCLAIMER

We disclaim any responsibility and shall not be responsible for any damages or losses incurred by the user in 

any of the following cases:

1. Fire, earthquake or any other act of God; acts by third parties; misuse by the user, whether intentional or 

accidental; use under extreme operating conditions.

2. Malfunction or non-function resulting in indirect, additional or consequential damages, including but not limited 

to loss of expected income and suspension of business activities.

3. Incorrect use not in compliance with instructions in this instruction manual.

4. Malfunctions resulting from misconnection to other equipment.

5. Repairs or modifications made by the user or caused to be made by the user and carried out by an unauthorized 

third party.

Notwithstanding the foregoing, Toshiba America Information Systems, Inc.’s (Toshiba’s) liabilities shall not, in any 

circumstances, exceed the purchase price of the product.

COPYRIGHT AND RIGHT OF PORTRAIT

There may be a conflict with the Copyright Law and other laws when you, the customer, uses, displays, distributes, 

or exhibits an image picked up by the camera without permission from the copyright holder. Please also note that 

transfer of an image or file covered by copyright is restricted to use within the scope permitted by the Copyright 

Law. You are solely responsible for complying with all applicable copyright laws.

PROTECTION OF PERSONAL INFORMATION

Images taken by the camera that reveal the likeness of an individual person may be considered personal information. 

To disclose, exhibit or transmit those images over the internet or otherwise, consent from such individual person 

may be required. You are solely responsible to obtain such consent.

LIMITATION OF USAGE

The product is not designed for any “critical applications.” “Critical applications” means life support systems, 

exhaust or smoke extraction applications, medical applications, commercial aviation, mass transit applications, 

military applications, homeland security applications, nuclear facilities or systems or any other applications where 

product failure could lead to injury to persons or loss of life or catastrophic property damages. Accordingly, Toshiba 

disclaims any and all liability arising out of the use of the product in any critical applications.

CAUTIONS ON USE AND INSTALLATION

• 

Handling the unit.

Do not drop, jolt, or vibrate, as this may result in damage to the unit and this may cause problems. Treat the camera 

cables carefully to prevent cable problems, such as breaks in the cable and loose connections.

• 

Install the camera in a location free from noise.

If the camera or the cables are located near power utility lines or a TV, etc. undesirable noise may appear on the 

screen. In such a case, try to change the location of the camera or the cable wiring.

• 

Operating ambient temperature and humidity.

Do not use the camera in places where temperature and humidity exceed the specifications. Picture quality will 

deteriolate and internal parts may be damaged.

Be particularly careful when using in places exposed to direct sunlight. When shooting in hot places, depending on 

the conditions of the object and the camera (for example when the gain is increased), noise in the form of vertical 

strips or white dots may occur. This is not a malfunction.

• 

When not using the camera for extended periods of time. 

Switch the control unit off and disconnect the power supply.

• 

Avoid using or storing the camera in the following places:

Places filled with highly flammable gas.

Places near gasoline, benzene, or paint thinner.

Places subject to strong vibration.

Places containing chemicals (such as pesticides), rubber or vinyl products for extended periods of time. 

The following descriptions are for when a camera control unit “IK-HD3D” is connected to this camera head.

• 

Do not shoot intense light.

If there is an intense light at a location on the screen such as a spot light, a blooming and smearing may occur. 

When intense light enters, vertical stripes may appear on the screen. This is not a malfunction. Ghosts may occur 

when there is an intense light near the object. In this case, change the shooting angle.

• 

Moire 

A  moire  pattern  is  an  interference  pattern  generated  when  two  repetitive  line  patterns  overlap.  This  is  not  a 

malfunction. Eliminating the repetitive line patterns, or aligning the two patterns, will eliminate the moire.

• 

Handling of the camera head and protection cap.

Keep the camera head and protection cap away from children, as they may pose a choking hazard. Because the 

protection cap protects the image sensing plane when the lens is removed from the camera head, do not discard  

the protection cap.

• 

When cleaning the camera.

Unplug the power source before cleaning. Clean with a soft dry cloth only. Do not use chemicals or chemically 

treated cloths. Chemicals may damage coatings and printed letters. When cleaning the lens, use lens cleaning paper.

• 

Installation of camera head.

When installing the camera head, secure it with the mounting holes at the bottom (M3 thread, depth 3.5 mm) or 

on a rigid tripod connected to the tripod mount attached to the base of the camera head. Ensure that the camera 

head is not pulled by the camera cable connected to the rear of the camera. Also do not apply any force or strain 

on the cable connector. When mounting a heavy lens to the camera, support the lens so that it is not applying any 

force or strain on the camera head.

Limited Warranty – TOSHIBA Camera

The Imaging Systems Division of Toshiba America Information Systems, Inc. (“ISD”) makes the following limited warranties 

with regard to this Camera (“Product”). These limited warranties extend to the Original End-User (“You[r]”).

One (1) Year Limited Warranty of Labor and Parts

ISD warrants that this Product will perform in accordance with specifications for a period of one (1) year from the date 

of purchase by the Original End-User. During this one (1) year period, ISD will repair or replace the Product, if it does not 

perform as warranted. In order to take advantage of this Limited Warranty, You must: (a) deliver the Product to an ISD 

Authorized Service Provider (“ASP”); and (b) pay all transportation and insurance charges for shipment of the Product to 

the ASP. ISD reserves the right to substitute factory refurbished parts in place of those in need of repair. 

Instruction Manual (Owner’s Manual):

You should read the Instruction Manual (Owner’s Manual) thoroughly before operating this Product. Before seeking 

warranty service, you should check the troubleshooting guide in the Instruction Manual (Owner’s Manual) and follow 

the instructions to correct the problem.

Your Responsibilities

This Limited Warranty is subject to the following conditions:

1. You must provide the bill of sale or proof of purchase at the time that warranty service is required.

2. All warranty servicing of the Product must be made by an ISD Authorized Service Provider.

3. You must pack the Product in its original carton using the original packing material, then insert the original carton containing 

the Product into another carton with additional packing material before shipping the Product to an ASP.

4.  Prepay all transportation and insurance costs.

DISCLAIMERS:

ALL  OTHER  EXPRESS  OR  IMPLIED  WARRANTIES  ON  THIS  PRODUCT,  INCLUDING  THE  IMPLIED 

WARRANTIES  OF  MERCHANTABILITY  AND  FITNESS  FOR  A  PARTICULAR  PURPOSE,  ARE  HEREBY 

DISCLAIMED. SOME STATES DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS 

ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. 
IF  THIS  PRODUCT  IS  NOT  IN  GOOD  WORKING  ORDER  AS  WARRANTED  ABOVE,  YOUR  SOLE  AND 

EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF THE PRODUCT. IN NO EVENT WILL 

ISD OR ITS PARENT COMPANY OR ANY ASP BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY DAMAGES 

IN  EXCESS  OF  THE  PURCHASE  PRICE  OF  THE  PRODUCT.  THIS  LIMITATION  APPLIES  TO  DAMAGES 

OF ANY KIND, INCLUDING ANY DIRECT OR INDIRECT DAMAGES, LOST PROFITS, LOST SAVINGS OR 

OTHER SPECIAL, INCIDENTAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES, WHETHER FOR BREACH 

OF CONTRACT, TORT OR OTHERWISE, OR WHETHER ARISING OUT OF THE USE OF OR INABILITY TO 

USE SUCH PRODUCT, EVEN IF ISD, ITS PARENT COMPANY, OR AN ASP HAS BEEN ADVISED OF THE 

POSSIBILITY OF SUCH DAMAGES OR OF ANY CLAIM BY ANY OTHER PARTY. SOME STATES DO NOT 

ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR SOME 

PRODUCTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER 

RIGHTS WHICH MAY VARY FROM STATE TO STATE.
THIS  LIMITED  WARRANTY  SHALL  BE  VOID  IF  THE  PRODUCT  OR  PARTS  HAVE  BEEN  SUBJECTED 

TO  MISUSE,  ABUSE,  ACCIDENT,  IMPROPER  INSTALLATION,  IMPROPER  MAINTENANCE,  OR  USE  IN 

VIOLATION  OF  ISD’S  WRITTEN  INSTRUCTIONS,  OR  WHERE  THE  PRODUCT  HAS  BEEN  ALTERED  OR 

MODIFIED WITHOUT ISD’S PRIOR AUTHORIZATION, OR UPON THE REMOVAL OR ALTERATION OF ISD’S 

FACTORY SERIAL NUMBER. LABOR SERVICE CHARGES FOR PRODUCT INSTALLATION, SET UP AND 

ADJUSTMENT OF CONTROLS ARE NOT COVERED BY THIS LIMITED WARRANTY. 

Questions? If you have any questions, please check ISD’s Web Site for a current e-mail contact for support:

Web Site: http://www.toshibacameras.com/

No person, agent, distributor, dealer, authorized service provider, or company is authorized to change, modify, or extend the terms of this Limited 

Warranty in any manner whatsoever. The time within which an action must be commenced to enforce any obligation of ISD arising under this 

Limited Warranty or under any statute, or law of the United States or any state thereof, is hereby limited to one (1) year from the end of the Limited 

Warranty period. This limitation does not apply to implied warranties arising under state law. Some states do not permit limitation of the time 

within which You may bring an action beyond the limits provided by state law, so the above provision may not apply to You. This Limited Warranty 

gives You specific legal rights and You may also have other rights which vary from state to state.

TOSHIBA AMERICA INFORMATION SYSTEMS, INC.

Imaging Systems Division

9740 Irvine Boulevard, Irvine, CA 92618-1697 
Copyright © 2013 Toshiba Corporation, Toshiba Corp, Toshiba America Information Systems, Inc.,TAIS. All rights reserved.

This manual is made from recycled paper.

SPECIFICATIONS

* These conditions are only satisfied when the camera head is connected to camera control unit model # IK-HD3D.

Image sensor

1/3 inch color CMOS sensor (rolling shutter/progressive scan)

Effective pixels

Horizontal : 1944, Vertical : 1092

Output pixels

Horizontal : 1920, Vertical : 1080

Power consumption

Approx. 8.7W (including the camera control unit) (with the power supply voltage 

of 12V)

Resolution 

Horizontal: 900TV lines standard, Vertical: 900TV lines standard

Sensitivity

F7 standard  (2000 lx, 3000K at 59.94Hz setting)

F7.7 standard  (2000 lx, 3000K at 50Hz setting)

Minimum illumination

9.9 lx  (at 59.94Hz setting, F2.2, sensi20dB, BINNING: ON)

8.2 lx  (at 50Hz setting, F2.2, sensi20dB, BINNING: ON)

19.8 lx (at 59.94Hz setting, F2.2, sensi20dB, BINNING: OFF)

16.3 lx (at 50Hz setting, F2.2, sensi20dB, BINNING: OFF)

Lens mount

C mount (flange back : 17.526 mm in-air)

Operating ambient temperature

0°C to 40°C (32° F to 104° F)

Operating ambient humidity

Less than 90 %

Weight

Approx. 34 g (0.075 lbs) (tripod mount and screws not included)

  Design and specifications are subject to change without notice.

   For more information, please refer to the section “9. SPECIFICATIONS” in the camera control unit IK-HD3D 

instruction manual.

OPTIONAL PARTS

     For further details, contact your camera dealer.

Camera control unit

Camera cable

Type name

Type name

Length m

Length inch

IK-HD3D

EXC-3HD03

Approx.3

Approx.118

EXC-3HD06

Approx.6

Approx.236

EXC-3HD10

Approx.10

Approx.394

EXC-3HD15

Approx.15

Approx.591

EXTERIOR DIMENSIONS

Unit : mm [inch]

Ø : diameter

27.4[1.08]

27.4 [1.08]

3.5[0.14]

24.5[0.97]

21 [0.83]

25 [0.98] 

17 .8  [0.70]

14.75

[0.58] 

33[1.30]

5.8[0.23]

5[0.20]

24.5[0.97]

17.8 [0.70]

4.2

[0.17]

29.5[1.16]

8

[0.32]

21[0.83] 

Bottom

Side

Side

Front

Bottom

Rear

Threaded hole

(1/4-20UNC) 

 hole

4-    2.2 

2-M2

basis

Depth3.5[0.14]

Same for the top

2-M2
Depth 3.5

[0.14]

Camera Head

Tripod mount

Reviews: