Form No. 3419-183 Rev A
Glove Box Cover Kit
Workman
®
GTX Utility Vehicle
Model No. 137-2883
Installation Instructions
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals known to the State of California
to cause cancer, birth defects, or reproductive harm.
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
No parts required
–
Prepare the machine.
Glove box cover
1
Latch assembly
1
Thumb pull
1
Lock washer
1
Nut
1
Hinge
1
Rivets
6
2
Foam strip
1
Install the hinge and cover.
Strike plate
1
Bolt
2
3
Hex nut
2
Install the strike plate.
1
Preparing the Machine
No Parts Required
Procedure
1.
Park the machine on a level surface and engage
the parking brake; ensure that the traction pedal
is in the neutral position.
2.
Shut off the engine and remove the key.
CAUTION
If you leave the key in the ignition
switch, someone could accidently start
the engine and seriously injure you or
bystanders.
Remove the key from the switch before
you do any maintenance.
© 2017—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3419-183* A
Summary of Contents for Workman 137-2883
Page 4: ......
