TRANSPORT INFO
BS 20.8
Chap. / 1
300355 E – 01/01
∆
Caution ! Before you unpack and handle the machine and to avoid
any damage to persons or property, read the safety directives given in
the Instructions 300291.
WEIGHT without pallet :
1
6000 kg
–
Pass two 50mm-dia. rods through Cylindrical
Passages B in Fig. 2.
–
Put four jacks each under one end of the lifting pipe.
HANDLING WITH HYDRAULIC JACKS
Fig. 1
(B)
3
1
2
UNPACKING
INSPECTION ON RECEPTION
–
Check the packing for alterations.
If altered :
–
Inspect the content immediately.
–
Record any irregularity in
the transport documents.
–
Inspect the machine on startup
for any damage that can be
established at that stage only.
–
If you find any, advise the
forwarding agent in writing.
2
–
Remove Top Cover 1.
–
Take away Side Walls 2.
–
Remove the four steel cov-
ers of shock absorbers if
any.
–
Do not remove the locks
until the machine is properly
located.
∆
Caution !
Use the points shown opposite for
lifting and moving the machine
about. Make sure your handling
hardware is adequate.
HANDLING
4
