![background image](http://html1.mh-extra.com/html/tjm/013compvprot/013compvprot_installation-and-user-manual_1120894001.webp)
Installation and User Manual
Product:
TJM Pro Series Twin Air Compressor
Vehicle:
Generic
Part No.
013COMPVPROT
For product warranty please refer to our website www.tjm.com.au
File: F-31070
Page 1 of 23
23/02/2021
•
Before commencing fitment read all instructions and ensure all listed components are supplied.
•
It is a condition of the warranty that the product has been correctly installed by suitably qualified
personnel and is used in accordance with accompanying instructions where provided.
For product
warranty please refer to our website www.tjm.com.au
•
Estimated Fitting Time: 2hrs (Horizontal Configuration or Vertical Configuration in open area), 5hrs
(Vertical Configuration in confined area)
•
Treat any holes drilled into the vehicle body with rust preventative paint.
•
Holes drilled for cable routing should have a suitable sized rubber wiring grommet installed. This will
prevent damage to the cables.
•
Always place the product on a soft workspace to prevent damage prior to installation.
•
Do not mount compressor below the water-wading line of the vehicle. Refer to the vehicle manufacturer
for this specification.
•
Compressor surfaces, especially the head section becomes
very hot
during operation. Mount away from
flammable materials and avoid locations where it may be accidently touched while operating.
•
Rated for 12 V DC systems only.