background image

Save these instructions & keep track of your product’s serial#

Submersible Sump Pumps

 

Models:  
SBA025T1/SBA025V1 (1/4 hp) 
SBA033T1/SBA033V1 (1/3 hp)  
SBA050T1/SBA050V1 (1/2 hp)
Operating & Installation Instructions 

             

This manual contains important 

safety and operating instructions. 

 

Read all instructions

 and follow 

them when using this product.  

Failure to consider this information 

and follow these instructions,  

including those concerning  

maintenance, may result in property 

damage, injury and or death.

Canature WaterGroup Canada Inc. (“Canature”) 

did not design or manufacture this product. Canature 

has no knowledge of and makes no representations or 

warranties respecting the product’s design,  

manufacturing, testing, packaging, or inspecting. 

Canature has disclosed all known risks associated with 

the product within this manual but cannot disclose 

risks that are beyond its knowledge.

NOTICE: THIS MANUAL CONTAINS A LIMITED 

WARRANTY. BY INSTALLING AND OR USING THIS 

PRODUCT, YOU WAIVE CERTAIN LEGAL RIGHTS 

INCLUDING THE RIGHT TO SUE OR CLAIM  

COMPENSATION IN THE EVENT OF PROPERTY  

DAMAGE, INJURY, AND OR DEATH.

PROFESSIONAL SERIES

Summary of Contents for DURO PROFESSIONAL Series

















Reviews: