THANK YOU FOR PURCHASING YOUR TIMEX WATCH.
EXTENDED WARRANTY
Available in U.S. only. Extend your warranty for an additional 4 years from date of purchase
for $5. You can pay with AMEX, Discover, Visa or MasterCard by calling 1 800-448-4639 during
normal business hours. Payment must be made within 30 days of purchase. Name, address,
telephone number, purchase date, and 5-digit model number required. You can also mail a
check for $5 to: Timex Extended Warranty, P.O. Box 1676, Dept. EF, Little Rock, AR 72203.
Please read instructions carefully to understand how to operate your Timex watch.
Your model may not have all of the features described in this booklet.
FEATURES
• Time and date display • Daily alarm • Chronograph • Hourly chime
BASIC OPERATIONS
Press MODE to set time, date and alarm or enter Chrono Mode. Press INDIGLO to illuminate
watch face. In any mode, press MODE to view time display. Press any button to stop alarm
beeps.
TIME AND DATE
A. Press and hold MODE until HOURS digits flash (you’ll be in Alarm Mode). Press MODE again
to enter TIME mode. SECONDS digits will flash.
B. Press ADJUST to set SECONDS to zero.
C. Press START/STOP to select MINUTES.
D. Press ADJUST to change.
E. Repeat to set HOURS, MONTH, DATE, and DAY of WEEK. Go through 12 hours to set AM
or PM.
F. Press MODE when done.
G. To display DATE from TIME display, press START/STOP.
H. With DATE displayed, press and hold START/STOP, then press ADJUST to change display
between DATE-MONTH and MONTH-DATE.
I. With TIME displayed, press and hold ADJUST, then press MODE to switch between 12- and
24-hour format.
START/
STOP
INDIGLO
ADJUST
MODE
WR50M
PM
START/
STOP
INDIGLO
ADJUST
MODE
www.timex.com
W-163-US
120-095000
ALARM AND HOURLY CHIME
A. Press and hold MODE until HOURS digits, DAY, and A or P (for AM or PM) flash.
B. Press ADJUST to change HOURS digits. Go through 12 hours for AM or PM.
C. Press START/STOP to select MINUTES.
D. Press ADJUST to change. Press MODE when done.
E. Press and hold ADJUST, then press START/STOP to turn chime on/off. Press START/STOP
again to turn alarm on/off. Release START/STOP when done.
When alarm time is reached, watch will beep and INDIGLO® display will flash for 20 seconds,
or until a watch button is pushed. Alarm will repeat every 24 hours until deactivated.
or
will appear in display when alarm is on.
or
will appear in display when
hourly chime is on.
