![background image](http://html1.mh-extra.com/html/timbertech/radiancerail/radiancerail_installation-manual_1116817001.webp)
Component Dimensions
RadianceRail
®
Gate Kit
Important Information
The RadianceRail Gate Kit is a convenient way to add a premium gate to your railing system.
Square Balusters
- 13 in 6’ Kits - 18 in 8’ Kits
Baluster Screw Kit
RadianceRail Gate Kit
Components Needed For Installing One
RadianceRail Gate with the RadianceRail Gate Kit
Tools Recommended
• Ratchet
Visit www.timbertech.com/installation to view TimberTech installation videos.
Consult your local building codes for gate requirements
• The RadianceRail Gate Kit is designed to work with RadianceRail only.
• The maximum width of a gate built with a Gate Kit is 48”.
• Gates should always swing away from the stairs when opening.
• Be sure to install on a post that is plumb; this is critical for the gate to
operate properly.
• Installation is easiest with two people.
1 - Top Rail
1 - Bottom Rail
2 - Support Rails
T-20 Torx driver bit
*Additional items are included but are not needed.
RadianceRail Rail Pack
RadianceRail Rail
Pack
RadianceRail Baluster
Pack
2 - Aluminum Side Rails (Brackets Attached)
2 - 4” Black Butt Hinges
1 - Gate Latch and Stop
8 - 3/16” x 1” Self-Drilling Flat Head Screws (black)
8 - 3/16” x 2” Flat Head Screws (black)
2 - 3/16” x 3/4” Self-Drilling Screws (black)
4 - 1/4” x 1” Screws (frame color)
2 - 1/4” x 2” Screws (frame color)
Aluminum Side Rails
Tools Required
• Miter Saw (blade
designed for finish cuts)
• Drill
• Level
• Tape Measure
• 7/64” and 11/64” drill bits
• Phillips Driver Bit
Baluster Screw Kit-8’ Kits
18 - #8x2” Coated Screws
18 - #8x3” Coated Screws
Baluster Screw Kit-6’ Kits
13 - #8x2” Coated Screws
13 - #8x3” Coated Screws
Butt hinges
Gate Latch & Stop
Assorted Screws
Top Rail
Support Rail
Baluster
Gate Latch
Aluminum Side Rails
Bottom Rail
Support Rail
Screws
Black Butt Hinges
Screws
Aluminum Side Rails
7
9
11
10
8
or